Remote Start / Remote KILL - Motorbike Alarm - 6 Sirens - Reference ALARM-REMOTE-START

Alarm with added feature to allow remote engine start and stop.

Digital Alarm with Remote Start and Remote Kill feature.
This superb next generation Digital Alarm allows remote ignition start and remote ignition kill, or it can be used as an easy to install basic alarm with a very loud 140db Speaker.
The user interface is simple and the whole design has been carefully thought through, the key Fob has four buttons which are protected under a slide case, the features include:

* 1 Button to Start/Kill the engine
* 1 Button to activate the alarm
* 1 Button to De-activate the alarm
* 1 Panic Alarm button used when motorbike is running


Included in this Sale
1 x Plug and Play Plastic Case Alarm Control centre Box
1 x Speaker 140db (plug and pluy directly to the control box
2 Sturdy Key Fobs with Slide cover for safety
1 Plug and play Wire loom with 30cm of lead
1 Wiring diagram on large A4 sheet giving a full diagram of the units wire path and technical specifications

Specifications
Alarm Box - Plastic construction 89mm x 63mm x 20mm
Speaker 10w Dimensions 55mm x 30mm
Suitable for all 12v vehicles
Remote Distance 100 metres
Standby current usage less than 0.6ma
Peak Power use 20w (when activated)

Installation - Just Alarm without remote Start - BASIC INSTALLATION
If you just want a vewry loud alarm then follow this simple guide
Locate and fit Speaker on bike
Locate position under seat for Alarm box
Connect loom lead to indicators
Connect loom to permanent power supply or directly to Battery (always connect Earth First)
Connect Speaker via Plug and play to Alarm control box
Plug Loom into plug and play Alarm control centre

Installation - Alarm with Remote Start
We strongly suggest that you have a Motorbike wiring diagram to hand and are able to understand basic wiring diagrams to work out the full installation.
All motorbikes are different therefore the main supplier is only able to provide any specific model installation information

Installation of the remote ignition will include some of the following connections :
line (BLUE LEAD) from the main wiring loom to the motorbikes loom, locating the correct Ignition lead to connect to IE :
(Honda - Yellow/red Suzuki Yellow/Green Yamaha - Black/White)
But please refer to your own diagram for the exact line colour as they will change on some models
A further line will also interface with the motorbikes Start Switch

The installation will need to be done by an electrically minded person or engineer, This is a complicated process as you are interfacing with a motorbikes ignition, however, the remote start feature is a lovely feature when fully connected.

Security
Click Here