www.longs-motor.com
This item includes:
1. 4 pcs Nema 34 stepper motor 1232 oz.in bipolar
2. 4 pcs Stepper motor driver, 7.8A ,256 Micsteps,replacing M860
3. 4 pcs Power Supply 350W-60VDC/5.83A
4. 1 pc Breakout Board
More quatities, More discounts!!
Detailed information :
1. Nema 34 stepper motor:
1, Technical Specifications
Part No.: 34HS1456
Frame Size: NEMA34
Step Angle: 1.8 degree
Voltage: 3.08V
Current: 5.6A/phase
Resistance: 0.55 Ohm/phase
Inductance: 5.5 mH/phase
Holding torque: 8.4N.m 1232oz.in
Rotor inertia: 2700g-cm2
Number of wire leads: 4
Weight: 3.8 kg
Length: 118mm
RED A+
GREEN A-
YELLOW B+
BLUE B-
2.Stepper motor driver:
Detailed pic:
1. Stepper motor driver DM860A:
http://www.longs-motor.com/ProductsView.asp?id=273&pid=83
Introduction:
DM860A is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
Features:
l High performance, low price
l Average current control, 2-phase sinusoidal output current drive
l Supply voltage from 24VDC to 80VDC
l Opto-isolated signal I/O
l Overvoltage, under voltage, overcorrect, phase short circuit protection
l 14 channels subdivision and automatic idle-current reduction
l 8 channels output phase current setting
l Offline command input terminal
l Motor torque is related with speed, but not related with step/revolution
l High start speed
l High hording torque under high speed
3. Power Supply:
The power is 350W, the output voltage/current is 60VDC/ 5.83A.
4. Breakout Board:
- Built in DB25 male connector.
- DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
- DB25 Input Pin: P10,P11,P12,P13,P15.
- DB25 GND Pin: P18-P25.
- Power supply: +5V DC.
- Built in C-class Optical-coupler.
- High quality with Surface-mount Tech.
Whats more, our products are mainly used in CNC machine, Carver machine, Automazation, Printer, Stage lighting and so on. If you have any questions about our products, please dont hesitate to contact me. And I will try my best to support you.
You can add my Msn:marychen1987@hotmail.com or my Skype: marychen198711, in that way, we can communicate in convenient and raprid.
Changzhou Longs Motor Co.,Ltd
Tel:0086-519-85138166
Skype: marychen198711
Wish you have a good shopping.
