Introduction:

GODOX DP series studio flash provides a functional and durable lighting solution for studio and workshop shooting. It is equipped with a wireless control port so that an optional remote power control and flash triggering system is available. With a solid build, it adopts Bowens- style mount to add various studio light snapping accessories .The flash performs excellently in portrait and product photography.
 
Specification:
 
1/2000 to 1/800 second short flash duration and fast recycling with 150W modeling lamp
(optional)Wireless control of the flash power ratio, modeling lamp and buzzer, as well as flash triggering 
Anti-preflash function, enabling synchronization with camera having a one-preflash firing system
Precise output control, 20 steps from 5.0-7.0 in 0.1 increments
Stable color temperature ranging with 5600±200K
Compatible bowens mount adds various accessories to give multiple lighting effects
Auto power discharge when the flash output is adjusted from high to low 
Adjusted setting are remembered after 3 seconds and recovered after a restart 
 
Model: DP1000
Max Power (WS): 1000Ws
Guide No. (m ISO 100): 92
Color Temperature: 5600±200K
Operating Voltage: AC200-240V/50HZ
Power Output Control: OFF, 5.0-7.0 (1/16-1/1)
Modeling Lamp (W) / Level: 150W
Recycle Time: 0.4-2s
Triggering Mode: Sync cord, Test button, Slave triggering, Wireless control port
Flash Duration: 1/2000 to 1/800 second
Fuse: 8A
Dimension: Length(with lamp cover): 40cm; Width: 13cm; High(without handle): 14cm; Cable Length: 488cm; Lamp Diameter: 3cm; Lamp Length: 10.5cm; Dimension(with original box): 48*25.5*23cm;

Weight: 3957g

Operation:
 
Take down the lamp cover. Install the modeling lamp and put on the standard reflector or other flash accessories.
Attach the flash units on an appropriate light stand. Adjust the mounting bracket for a good angle and make sure it is tightened and fixed. Use the direction adjusting handle to adjust the flash to a desired direction. Umbrella input is for different photo umbrella to put in. 

GODOX 16-Channels FT-16 Flash Trigger：

This GODOX 16-Channels FT-16 Flash Trigger supports flash grouping and remote flash power control. With sensitive reactions and stable signal transmission, it applies to flashes with the wireless control port, such as, Godox AD180 flash, Godox QT series and Gemini GT & GS series studio flashes, as well as specific camera flashes. It is also compatible with Godox Cells series Transceiver.

* Wireless control
Setting flash power on/off, power level, modeling light on/off, buzzer on/off, and flash triggering

* Remote power adjustment
Each flashgroup can be set to 16 different power levels

* Flash grouping
Firing at most 16 group of flashes for creative photography

* One-for-Multiple
Flexible combinations of one transmitter and multiple receivers

* LCD display & Metal Contact

Specification:

Using Guide:

-Insert the receiver into the wireless control port of flash.
-Attach the transmitter onto your camera's hot shoe.
-Set the channels of transmitter and receiver to the same. Turn on the power switch and make settings for different groups.

 
Package included:
 

• 3 x Studio Flash 220V
• 3 x Lamp Cover 
• 3 x Modeling Lamp
• 3 x Power Cord
• 3 x Instruction Manual 
• 1 x GODOX Transmitter FT-16
• 3 x GODOX Receiver FT-16
• 3 x SN-303 2.8m Light Stand
• 2 x Bowens mount Godox 60*90cm softbox​
• 1 x Godox 120cm Bowens Mount Softbox