|
MADE IN THE U.S.A DONT MISS OUT AT THIS SALE PRICE ! I will need to know which Brand Lathe and bed length you have before I can assemble and ship . 7x10 ,7x12, 7x14 ?
======================================================================
I THANK YOU IF YOU ARE CONSIDERING MY CNC MINI LATHE KIT . LEAD TIME FOR THIS KIT COULD TAKE UP TO 7 DAYS AFTER PURCHASE TO SHIP SO PLEASE MAKE NOTE OF IT IF YOU DECIDE TO PURCHASE . THANK YOU !
This kit has a Ballscrew on the X and the Z Axis .
This kit will require drilling and tapping of holes in the saddle, cross slide and the lathe bed end to mount this kit . All information will be sent tru e-mail after kit purchase .If you are unable to do the hole patterns in the saddle and cross slide contact me . Due to the design of the X axis it will require to be un assembled and reassembled to go tru the lathe saddle hole . I have some very good picture instructions that covers all of this .This kit will come ready to install on your 7 X 10 model seig lathe and with an additional part I make it will fit the 7 X12 , and the 7 X14 model Seig lathe as well once you get the holes added that are required to mount this kit . Depending on which bed length you may have an additional Z axis extension coupler part shown in the listing that will allow it to work on the 7 X12 , or the 7 X14 models ...... NOTICE !!! I will need to know which Lathe you have before I can assemble and ship . ( THE LATHE , CONTROLLER AND STEPPER MOTORS ARE NOT INCLUDED AND ARE FOR DISPLAY & DEMO ONLY )
SEE SEPERATE LISTING FOR THE 7X16 CNC CONVERSION KIT ! Thanks
=============================================================
This listing is for one complete mechanical conversion of your Sieg manufactured mini lathe to Computer Numerical Control.This kit is well designed, and manufactured with care to produce the best quality results possible for the investment.
I have sold similar kits and they have been installed on the HarborFreight , MicroMark, LittleMachineShop Seig lathes and other brands as well with no problems and no other instructions other than what I send with the kit by way of E-MAIL
The installation is simple, but requires a careful attention to the details of hole-placement. It is well within the scope of abilities of anyone with a realistic objective to learn CNC. It requires drilling and tapping 9 holes and opening up another for clearance.
This kit is constructed from machined aluminum parts which features an attractive machine finish that looks Great on this setup. The bearings are high quality, and sealed for longevity. Both Axis designs have a 1204 mm ballscrew with a New 1204mm Ballscrew Design for the X Axis . The CNC Flexible Plum Coupling 1/4 Shaft Couplers are included with the kit. The kit will arrive pre assembled and ready for installation on either the 7 x 10" , 7 x 12" or the 7 x14 length bed Seig models.. The X axis will require a final assembly into your saddle after the mounting holes are done .
This kit allows you to retain manual control of the Lathe , providing that dual-shaft motors are used. Threading function, however, will not be retained, and can only be made possible by use of a spindle encoder which may be available elsewhere, but I am unable to help with that modification.
This kit will work Great with NEMA 23 size steppermotors 1/4 SHAFT ( 270oz ) range motors as are used in the video demos in this listing . ( THE LATHE , CONTROLLER AND STEPPER MOTORS ARE NOT INCLUDED AND ARE FOR DISPLAY & DEMO ONLY ) which can be purchased together or separate with a controller kit . A couple of these packages that I feel represent a good value can be found here ( Please understand that I am not affiliated with these sellers )
Deepgroove1 Gecko control box
KELING ING STEPPER MOTORS
SEE 4 VIDEO DEMOS OF THIS KIT BELOW
===========================================================================================================================
This kit is crafted with care by an experienced tool and die maker to provide years of service for any enterprising individual that wishes to explore CNC and or make useful parts on a really great little machine. The kit includes all mounting hardware necessary for installation, and uses existing holes for mounting whenever possible, but does require drilling and tapping of some of them, as it would be impractical to design the kit around the hole placement of the manual parts..( Tap & Drill information along with Pictures and Step by Step installing information will be sent by email after auction ends ...) The design favors utility over absolute installation simplicity, but makes no compromises that should inhibit the serious user from installing the kit............ Thank you for considering this item, and please feel free to contact BDTOOLS with any inquiries............... SEE FEEDBACK LEFT ON THIS ITEM.......... Thanks
|