Preface

Thank you for purchasing this Long-Range Two-Way FSK car alarm system with pke function

 This vchicle secuity systen features a state-of-the-art technology and FSK design to give you maximum safety and satisfaction in using the system.

 1)Please read this manual carefully before using this car alarm do that you'll take

the full advantage of every marvelous featues provided by thes systwm.

 2)Seller is responsible for the service and warranrty.

 3)The system raquires on specific maintenance. Your remote control is powered

by a small 1.5volt 3AAA Alkaline battery .When the battery weakens,

operating range will be shortened.When the battery icon"-"begins flashing on

the LCD screen, please replace the battery.

 4).This device may not cause harmful interference,

and;This device must accept any interference received,including interference

that may cause undesired operation,Changes or modifications not expressly

to operate this device.

 5)Due to the complexity of this system,it must be installed by professional staller

 6)All the module and interconnection cables are inaccessible to the end user except the remote control,valet switch,the antennna and its signal cables

Universal Two Way Car Alarm System with remote start stop function

Model No:CD-T182

Product Bacic Features:

1.remote arm or disarm

2.query function

3.side door alarm

4.shock alarm

5.LED indication

6.panic mode

7.trunk release

8.auxiliary output

9.remote engine start

10.anit-robbery mode

11.valet mode

12.central lock automatication

13.hood release

14.time setting

15.stand by mode

16.engine auto detection

17.noiseless protection mode enabling

18.auto start

19.tubor mode

20.learning code

21.reset to factory setting

22.supporting manual or auto transmission car

23.supporting diesel or petrol car

24.bypass output

25.window rolling up output

Product compositions:

1 main unit,2pcs FM LCD alarm remotes,1pc start cable,1pc main cable,1pc shock sensor,1pc valet switch,1pc anti-robbery button,1pc alarm electronic siren,1pc killer relay,1pc alarm antennas,1pc english manual,1pc color box.

Remote Operations:

Product Real Photos:

Special Instruction:

         1.remote battery is cell button battery,model no is 1.5V AAA dry battery,1pc battery per remote,it is easy to buy this battery!so we won't send you remote battery.

            2.product has window rolling up output,negative signal trigger,we won't send you window closer module

            3.Product has some auxlliary output wires,they are optional use.installer can connect them or not by car owner need such as window closer output and bypass output.

            4.temperature sensor is built in alarm main unit!

System lnstallation

1.Due to the complexity of this system,installation must only be performed by an authorized dealer.

2.Thoroughly read become familiar with the installation instructions before beginning the installation

3.Review system contents:

  a Main Control Unit

  b.Siren

  c.shock sensor

  d.Starter Kill Relay

  e.Harness:

4.Verify vehicle is equipped with electronic fuel injection, and starts/idles normally before installation.

5.Determine if vehicle is equipped with a factory theft deterrent system and obtain proper bypass module

if required.

6.Find a location to mount the hood pin switch that will not interfere with the opening of the hood,and

is not in a position that can accumlate water.The hood pin is a safety device that must be installed to

avoid remote starting during engine servicing.

7.Verify with the owner,the mounting locations for all visible components,including the LED and Receiver.

8.Verfy with the owner,the optional features of vehicle security system and the features that must be

programmed during installation.

9.Inspect and perform a function test of all vehicle systems before and after the installation.

10.Always use aVolt/ohm meter for testing vehicle circuits.Never use a test light.

11.Always look before drilling any holes or mounting self-tapping screws,Be sure fuel lines and exterior

wiring looms are clear as they are often close to the chassis and difficult to see.

12.Protect all wires runnong from the engine comparment to the interior of the vehicle by covering with

electricsl tape and split loom tubing.Be sire to use a grommet when routing wires through the firewall.

13.Properly fuse any additional accessories such as starter module, window module, door lock actuators.

etc.,Making sure to power them separate from the alarm Main Unit.This will ensure the functionality of

the security system in the event of an accessory failure.

14.Remove all fuses to avoid running down the battery during installation.

15.Roll down the driver's side windiw to avoid locking the ignition keys in the vehicle,