>    NOTICE <    THIS CNC BALLSCREW CONVERSION KIT IS MADE IN THE U.S.A  DESIGNED AND BUILT BY BDTOOLS NOT THE MANUFACTURER TO FIT THE GRIZZLY G0602 & THE G0752 10X22 STYLE LATHE .

==============================================================

                 I  THANK YOU  IF YOU ARE CONSIDERING MY GRIZZLY G0602 , G0752 CNC BOLT ON BALLSCREW KIT . THIS KIT COULD TAKE UP TO 7 DAYS  AFTER  PURCHASE  TO SHIP SO PLEASE MAKE NOTE  OF IT IF YOU DECIDE TO   PURCHASE             THANK  YOU !

                This Bolt on X & Z Axis ballscrew kit is designed and built by BDTOOLS to convert your Grizzly G0602 or G0752 , 10 x 22 manual lathe to CNC using the  mounts and ballscrews  supplied in this listing . All parts are Custom made to assure proper fit and are designed to install into the original Mounting holes  . You have NO holes to drill or tap and NO modification is needed to your lathe to install this kit  . I have designed this kit to come to you already assembled and can be installed with minor  difficulty . 

A ) Both X and Z Axis come with   linearmotionbearings2008  style  Ballscrews .

B ) The Gecko 540 Controller used in my videos with Mach3 software worked Great even with the  270 oz motors , so anything larger  would just be better up to a 3/8  max  Dia. shaft . 

C )  All Custom made Aluminum parts come to you with a Great looking Machine  finish as is and any other screws required are included in the Kit. See additional pictures of a previous Customers Color Matched parts for a different look .

X AXIS 

    The X axis comes with a 1 to 1 Belt Drive Ratio that is completely enclosed  .This unit uses Angular Contact Bearings in its newly designed mount. Shown with a Nema23  270 oz  StepperMotor which  shows  easy movement   and   proper function .This stepper motor was for  demo only and can be increased to suit your needs .The Nema23 motor plate is slotted for easy belt adjustment up front and only takes a second if needed .  The X axis will install into the original holes  along with the original screws without removing the cross slide or the Gibb .

Z AXIS         

The Z axis is a Direct Drive setup  that also uses Angular Contact Bearings  along with a OldHam style  3/8  I.D. Coupler .  It will come assembled  ready to install  into original holes with minimum effort .This kit is shown with Nema 23s  270 oz motors in the videos , and you can increase to your desired motor size up to a 3/8 dia. shaft . 

    This kit was crafted with care by an experienced tool and die maker to provide you with years of service and make useful parts on a really great little machine.You will not be disappointed in the quality of this kit  The kit  will  include all mounting block hardware necessary for installation   .  E-mail  me for any questions you may have about this kit .  

STEPPER MOTOR IS FOR DEMO ONLY AND IS NOT INCLUDED

                                               MADE IN THE  U . S . A . 

                                                                                                    THANKS    !   BDTOOLS