Welcome to eSPee-Track-Cleaning.
We have merged both of our ebay Stores into one.
This was ended on 06/30/2017.
The new listing is now available... eSPee S Scale Cleaning Pad Kits.
.
Scale: S / 1:64
.
Manufacturer: eSPee Customs
.
Description: S Scale 40' Boxcar & Reefer Track Cleaning Pad Kit
.
Features:
  • custom made track cleaning pad
  • do-it-yourself track maintenance kit
  • fits 40' S Scale Boxcars & Reefers
  • requires a 1/8" metal drilling bit
  • full instructions included (see picture 2)
  • 100% USA parts & homemade assembly
  • use dry (recommended) or wet (information included)
  • package weight: 4.0 ounces
  • eSPee Customs packaging
Condition: New
.
Comments: 2017 begins our entry into the S Scale market. We have been selling N, HO, and O Scale products for years along with a bit of Z Scale from time to time and have finally brought our product to the model railroaders of S Scale. We think you are going to love this product as much as your fellow modelers in other scales have. Give it a try on your railroad and see what you think. All of our products come with a 100% money back guarantee. Run one of our pads on your railroad for up to 60 days and if you are not happy there is a refund waiting for you along with free, no questions asked return shipping. Have any questions or comments? Please don't hesitate to hit that "Contact Seller" link in this listing. We are always happy to hear from you and will do our best to get back with you quickly.
.
Attention 3 Rail Tube Track Users... please have a look at photo #3 in this listing. Take a few minutes and check your rails in several areas of around your layout to make sure all 3 rails are level with each other. If one rail is higher or lower than any of the other 2 rails this cleaning pad will not work for you. The pad will simply ride the highest rail(s) and that is not going to do you any good. Again... PLEASE make sure all 3 rails are level. The pad is designed to float on your rails and adjust to any elevation changes but it cannot bend to fit non-level rails.
.
THIS ITEM IS NOT A TOY.
Product contains sharp nail tips and lead weights.
Not suitable for children under the age of 14 years.
.
KEY FEATURES OUR PADS DON'T HAVE
No... "roller wraps" to fumble around with.
No... "cleaning disks" to constantly change.
No... "felt pads" to snag on rail joints & switches.
No... "motor noise" while using our cars.
No... "abrasives" that scratch your rails clean.
No... "extra parts" to buy over and over again.
.
KEY FEATURES OUR PADS DO HAVE
Yes... one pad can last for years, no extra parts to buy!
Yes... weighted free floating pad, follows your track profile!
Yes... use dry or wet with your choice of cleaning fluids!
Yes... weighted pads for perfect rail contact all the time!
Yes... no snags on rail joints, switches or crossings!
Yes... designed to "blend in" so you can clean all the time!
Yes... very easy maintenance, just scrub clean and go!
Yes... Fits a variety of car types to match your style!
Yes... super low friction, your locomotive will hardly notice!
.
Installation information...
The cleaning pad comes 90% assembled, only the egg weights need to be added. A 1/8" metal drilling bit and a power drill are REQUIRED for installation, a metal file and micro screw driver may also come in handy but are not required. Complete instructions are provided in the second picture of this listing and also included with your purchase. We back this product 100%, we have sold thousands of track cleaning cars over the years in various scales with this amazing pad attached to them and have had many inquiries about Do-It-Yourself kits so for you hands on DIY kinds of people here you go. Have some fun and build your own track cleaning car.
Pad measurements are approximately... 70mm (long) x 40mm (wide) x 8mm (thick). Please check the clearances on the unit you are planning on installing this cleaning pad on to make sure there is enough room between the trucks inner most wheels and under the car when placed on the track.
.
What is this cleaning pad made of?..
The pad is made of a wood product called Masonite, cut and formed to fit a variety of rolling stock. The pad blanks are made using a template so every blank is the same as the one before it. Each S Scale pad requires 2 blanks to make one complete pad. We drill out the nail holes and countersink 2 nails into one pad then glue and clamp the other piece into place. After the two pieces are dry we cut the angles and then sand the edges smooth by hand. Really... every single pads final shaping is done one at a time by hand! The pad is held onto the car by the two nails and two weights. The pad is weighted to keep it in solid contact with your rails at all times yet it is free floating so it can move up and down to match your tracks profile. The hand formed beveled edges prevent the pad from snagging on track joints, switches and crossings. The sides and top of the pad are painted black to help hide it under the car, basically simulating a shadow under the car.
.
How does the pad work?..
Masonite is a very soft fibrous wood that is super absorbent. It is impossible for this soft wood product to scratch your metal rails and if used dry as recommended it will also never corrode your rails from chemical cleaners. The fact is... wood cannot scratch metal under any circumstance so don't believe those who claim a Masonite pad is abrasive. What the pad does is quite simple. It slowly and gently removes layer after layer of oxidation by absorbing it off your rails and into the pad. With each pass it picks up more and more. You will notice an improvement in your locomotive performance after just a few laps around your layout. The more you use it the better it works. Does this pad provide an instant clean?.. NO. Will it ever make your rails pass the "white glove test" as some cleaners claim they do?.. NO.  It was never designed to do either of those things. What it will do with regular use is provide you with a constant level of clean that will keep your locomotives running at their best with minimum effort from you. Our hope is that you will find the perfect car to install this DIY pad on so it will match your style of railroading and then run the car constantly on your layout, only removing the car long enough to clean the pad from time to time
.
How long will a cleaning pad last?..
The pad will last MUCH longer than any other cleaning pad on the market regardless of price, it has the potential to last for YEARS if you take care of it correctly. Not even the big boys of track cleaning cars can out last this pad, nor can they even come close to the price or great results. That includes the super expensive brands that require constant changing of the cleaning cloth, spinning disks and/or felt pads. We have been using the same pads on our display track cars and home layout for years, thousands of scale miles and not a single pad is even close to needing replaced!
.
How do I "clean" the cleaning pad?..
This is very simple, all you need is a stiff bristle toothbrush and some rubbing alcohol. Simply dip the the brush into the alcohol and start to scrub the accumulation of black goo (oxidation) off the cleaning pad. The more you scrub the pad the more it will come clean. Don't forget to rinse the toothbrush in some warm water when finished. Please keep in mind that no matter how much you scrub the pad you will never get it to look new again so don't go crazy about it. Just focus on getting the darkest build-up of oxidation off the pad so you can get your cleaning car back on the track. Once the pad is dry you are ready to start cleaning again.
.
How do I know when I need to remove or replace the pad?..
The pad will last a very long time, however it will eventually wear out and need to be removed. To put it simply, when you have worn the pad down to the second layer of wood it is time to replace the pad. One of the great features of this cleaning pad is that it requires no alterations to your car other than 2 small holes through the base. You can remove the pad and add the car back into your regular fleet or train cars and never notice that at one time it had a cleaning pad attached to it or replace the pad in a few minutes. To remove the pad, take the car shell off the base, loosen the screw eyes that are holding the weights against the nails and slide the pad out from the bottom of the base.
.
Are replacement pads available?..
Yes, this item is for brand new installation and for replacement use. If you are buying a replacement pad make sure you buy the CORRECT size, this listing is for pads that fit S Scale 40' boxcars & reefer units only.
.
***SAFETY WARNING!***
THIS PRODUCT CONTAINS VERY SHARP NAIL TIPS.
PRODUCT ALSO CONTAINS LEAD WEIGHTS.
Please work safely and wash your hands after handling the lead weights.
.
ALLERGY NOTICE:
All of our listings are exposed to CIGARETTE SMOKE and CATS!
We store our items in a smoke and pet free room, however that does not make them allergy safe.
If this is a problem for you please DO NOT buy our items and shop somewhere else.
.
PAYMENT INFORMATION:
We do not require "IMMEDIATE PAYMENT" on any of our listings.
For "Buy It Now" purchases payment should be received within 7 Days after committing to buy.
If you are being forced to pay immediately please contact ebay Customer Support.
ebay Customer Support can be reached at 1-866-540-3229 Mon-Fri 5am to 10pm and Sat-Sun 6am to 6pm Pacific Standard Time.
Failure to complete the purchase on time will result in the item going to ebay Collections.
The purchase will be canceled and the item re-listed after the collection process is complete.
Please contact us if you need more time to pay, we can work out the details.
Internet payment can be made through...
PayPal... Using your Credit Card, Debit Card, Money Transfer or *eCheck.
Other forms of payment are accepted, please contact us for details.
ATTENTION OHIO RESIDENTS... you will be charged a 6% sales tax on all purchases.
*eCheck purchases will be held until the check clears.
Allow 3-5 business days (domestic), 5-7 business days (international) for the eCheck to clear.
We will receive an official notice from PayPal when your check clears.
.
RETURN POLICY:
All items sold include FREE RETURNS, really... 100% free return shipping.
Click the "Shipping and payments" tab in ANY listing, scroll to "Return policy" for details.
This item as with all our items is a NO RISK purchase for you.
True customer service is very rare on ebay, however it does exist with us.
Feedback is NOT the way to solve a problem, try using ebay Messages first!
We doubt the kind of person who leaves bad feedback will read this anyway, worth a try though.
.
SHIPPING RATES (DOMESTIC):
Domestic shipping includes all 50 U.S. States, APO/FPO and U.S. Territories / Protectorates.
Most items ship within 24 hours of confirmed payment, some even the same day.
There is no shipping on Sundays or Federal Holidays, the Post Office is closed.
Cut off time is 3 PM EST (12 PM PST) Mon., Tues., Thurs. and Fri... our Post Office closes at 4 PM EST.
Wednesday and *Saturday cut off time is 11 AM (8 AM PST)... our Post Office closes at 12 PM EST.
*NOTE... Saturday shipping is our choice and is not guaranteed by ebay or us.
.
U.S. Territories / Protectorates include the following locations...
  • American Samoa
  • Federated States of Micronesia
  • Guam
  • Northern Mariana Islands
  • Palau
  • Puerto Rico
  • Marshall Islands
  • Virgin Islands
.
SHIPPING RATES (INTERNATIONAL):
Yes, we do combine shipping to try and save you money, please request an invoice for multiple items.
International buyers are responsible for all TAXES and/or FEES your nation may put on this item!
Contact your customs office for details on what the possible charges are BEFORE you make a purchase.
Expect a 2-6 week delivery time for USPS First Class International packages.
Current USPS First Class International postage prices are posted at the bottom of this listing.
We receive USPS discounts that range from 10% to 15%, the discount is always passed on to you.
The actual discount percent received is not known until we process your shipping label.
Exact postage cost will be charged, all extra money is refunded at the time of shipping.
We make NO MONEY on postage costs, please remember this when you leave "Star Ratings" for us.
A photocopy of your actual customs form will be sent to you showing the money spent on postage.
.
International shipping is available to the following 30 NATIONS only.
Tracking with Delivery Confirmation is provided through USPS Delcon Service.
Bids and/or purchases made from nations not on the list will be canceled, no exceptions.
  • Australia
  • Belgium
  • Brazil
  • Canada
  • Croatia
  • Denmark
  • Estonia
  • Finland
  • France
  • Germany
  • Gibraltar
  • Great Britain
  • Hungary
  • Israel
  • Italy
  • Latvia
  • Lebanon
  • Lithuania
  • Luxembourg
  • Malaysia
  • Malta
  • Netherlands
  • New Zealand
  • Norway
  • Portugal
  • Singapore
  • Slovak Republic
  • Spain
  • Switzerland
  • Turkey
International USPS prices effective 01/22/2017, prices are always subject to change.
Postage price DOES NOT include your nations TAXES or other types of import fees!
You are responsible for those costs once your package arrives in your country!
.
World (prices very by location)   Canada
Pound(lb),Ounce(oz) / Cost (U.S. Dollar)     Pound(lb),Ounce(oz) / Cost (U.S. Dollar)
0 lb, 01 oz - 0 lb, 08 oz / $13.50                   0 lb, 01 oz - 0 lb, 08 oz / $09.50
0 lb, 09 oz - 2 lb, 00 oz / $22.50                   0 lb, 09 oz - 2 lb, 00 oz / $15.50
2 lb, 01 oz - 3 lb, 00 oz / $34.50                   2 lb, 01 oz - 3 lb, 00 oz / $24.50
3 lb, 01 oz - 4 lb, 00 oz / $49.50                   3 lb, 01 oz - 4 lb, 00 oz / $36.50
USPS First Class International ends at 4 pounds.