Flywheel Puller 50mm x 1.5 RH For Suzuki King Quad 450 / 700 2005 2006 2007

Description

This product was featured in ATV Illustrated Magazine
Read the article >

Brand New Flywheel Puller

• Essential tool to remove magneto flywheels without causing damage
• M50 x 1.5 right hand internal thread
• Includes crankshaft thread protector cap
• Fits Suzuki ATV, Motorcycle, and Scooter (see fits models for more information)
• The quality exceeds the OEM equipment
• One year limited warranty

All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

Vehicle models fitment

Arctic cat 366 4x4 Automatic 2008
Arctic cat 366 SE 4x4 Automatic 2011
Arctic cat 375 2x4 Automatic 2002
Arctic cat 375 4x4 Automatic 2002
Arctic cat 400 2x4 1998-2000
Arctic cat 400 2x4 Automatic FIS 2003-2004
Arctic cat 400 2x4 Manual 2001
Arctic cat 400 2x4 Manual FIS 2002-2004
Arctic cat 400 4x4 1998-2000
Arctic cat 400 4x4 Automatic 2003-2005
Arctic cat 400 4x4 Automatic 2008
Arctic cat 400 4x4 Automatic ACT 2004
Arctic cat 400 4x4 Automatic ACT MRP 2004
Arctic cat 400 4x4 Automatic FIS 2003-2008
Arctic cat 400 4x4 Automatic FIS Limited Edition 2005-2007
Arctic cat 400 4x4 Automatic FIS MRP 2004
Arctic cat 400 4x4 Core 2013-2014
Arctic cat 400 4x4 Manual 2001-2004
Arctic cat 400 4x4 Manual ACT 2004
Arctic cat 400 4x4 Manual ACT MRP 2004
Arctic cat 400 4x4 Manual FIS 2002-2008
Arctic cat 400 4x4 Manual FIS MRP 2004
Arctic cat 400 VP 4x4 Automatic 2005-2006
Arctic cat 400 VP 4x4 Manual 2005-2006
Arctic cat 425 2011-2012
Arctic cat 450 2011-2014
Arctic cat 450 Core 4x4 2013
Arctic cat 450 Core EFI 2013
Arctic cat 450 GT Power Steering 2012
Arctic cat 450 H1 EFI 2010-2011
Arctic cat 500 2014
Arctic cat 500 4x4 1998-1999
Arctic cat 500 4x4 Automatic 2000-2002
Arctic cat 500 4x4 Automatic FIS 2002-2008
Arctic cat 500 4x4 Automatic FIS MRP 2004
Arctic cat 500 4x4 Manual 2000-2002
Arctic cat 500 4x4 Manual FIS 2002-2008
Arctic cat 500 4x4 Manual FIS MRP 2004
Arctic cat 500 Automatic 2008-2009
Arctic cat 500 Automatic FIS Limited Edition 2005-2006
Arctic cat 500 Automatic Limited Edition 2008-2009
Arctic cat 500 Core 4x4 2013
Arctic cat 500 Manual 2008-2009
Arctic cat 500 XT 4x4 2013-2014
Arctic cat 650 H1 2008-2012
Arctic cat 650 H1 Limited Edition 2007
Arctic cat 650 V-Twin 4x4 Automatic FIS 2005-2006
Arctic cat 650 V-Twin 4x4 Automatic FIS Limited Edition 2005
Arctic cat 700 2011
Arctic cat 700 4x4 Limited Edition 2013
Arctic cat 700 Cruiser H1 EFI 2009-2012
Arctic cat 700 Diesel 2007-2008
Arctic cat 700 Diesel 2011-2012
Arctic cat 700 EFI FIS 2007
Arctic cat 700 EFI FIS Limited Edition 2007
Arctic cat 700 EFI Limited Edition 2008
Arctic cat 700 EFI Special Edition 2006
Arctic cat 700 GT EFI 2012
Arctic cat 700 H1 Special Edition 2009
Arctic cat 700 Limited Edition 2011-2012
Arctic cat 700 Limited Edition 2014
Arctic cat 700 Power Steering Limited Edition 2011
Arctic cat 700 XT 2014
Arctic cat 700 XT 4x4 Power Steering 2013
Arctic cat TBX 400 4x4 Automatic 2004-2006
Arctic cat TRV 400 4x4 Automatic 2006-2007
Suzuki LTA 400 Eiger 4x4 Automatic 2002-2007
Suzuki LTA 400 Eiger Automatic 2002-2007
Suzuki LTA 450 X Kingquad AXi Automatic 2007
Suzuki LTA 500 F Vinson 4x4 Automatic 2002-2007
Suzuki LTA 500 F Vinson 4x4 Automatic Limited Edition 2004
Suzuki LTA 700 X KingQuad 4x4 2005-2007
Suzuki LTF 400 Eiger 4x4 Manual 2002-2007
Suzuki LTF 400 Eiger Manual 2002-2007
Suzuki LTF 500 F Quadrunner 4x4 Manual 1998-2002
Suzuki LTF 500 F Vinson 4x4 Manual 2004-2007

OEM part replacement

09930-30721
09930-30721-LPT
0444-075
08-0417
0444-206
0444-254

Specifications

Specifications:

MP# 31 50mm x 1.5 RH Female

Instructions

Removing a Powersport Vehicle's Flywheel / Rotor:

How it Works

Flywheel Pullers are very versatile engine service tools and are a must in every toolbox. Our large selection of best selling rotor and flywheel pullers fit just about any motorcycle or ATV. Flywheel pullers are very simple to use, having only an outer body to hold the flywheel and a screw to push on the crankshaft. Some are even simpler, having only a bolt to thread into the flywheel. A taper holds the flywheel or rotor and the crankshaft together. The flywheel is secured to the shaft by applying torque to the fixing bolt.

An Important Component to use

Many flywheel or rotor puller tools will include a small cap. This is a crankshaft thread protector, and should always be used if it is included with the puller. You slip this cap onto the end of the inner piece of the puller which presses against the tip of the crankshaft. This keeps the fine threads from being stripped or damaged while removing the flywheel or rotor.

Actions to Avoid

Most of the time, removing a flywheel or rotor is painless. But sometimes corrosion, over-torqueing the fixing bolt, or heat-cycling can give you a hard time removing the flywheel. We too often see mechanics use a larger breaker bar or air impact tools to ease the flywheel off. These two techniques will damage the flywheel, the flywheel puller, or the crank. Avoid using them if you want to keep it cheap.

Tips to break a stuck flywheel loose:

Torque Wrench

How do you know if it’s stuck? You simply have to set your torque wrench to 50 ft-lbs and try to ease the flywheel off. If the flywheel is not stuck, you should be able to remove it with even less torque than this. If it is stuck, don’t use more torque or you might break your wrench.

Ball Peen Hammer

If 50 ft-lbs does not do the trick, go fetch something like a 12 or 16 oz ball peen hammer. Hit the end of the flywheel puller with a medium blow. Many times, the shock you create will successfully remove your flywheel. Be prepared to catch the flywheel since the shock of the hammer can make the flywheel jump off. Once again, getting into that situation will be pricey. And don’t forget your safety glasses.

Propane Torch

The hammer is not a be-all, end-all solution. Sometimes, you will have to find something more powerful, and that’s where the propane torch comes in. As a last resort solution, the heat should expand the flywheel but not the crank, since it is too massive to expand as fast. That way, the flywheel will become looser and will come off easier.
Important Security Tips: In order to not set fire to your garage, your vehicle, or yourself, certain precautions are necessary prior to heating the flywheel:

• Clean any oil or flammable liquids off the flywheel;
• Make sure your work area is free of any flammable liquids and that you work in a well ventilated area;
• Make sure to remove the gas tank, and set it aside at a safe distance.

With these tips and techniques, you are now equipped to handle any stuck flywheel without throwing your flywheel puller at it; unless you have a habit of working with machines that have been in a lake for months!

Videos

Customer service at a glance

Returns only apply to new unused products purchased with in the last 30 days. Please visit our store's complete return policy for more details.
For more details regarding a one year limited warranty, please visit our store's complete warranty policy.

RM STATOR around the world