Welcome to TST Mosaic Tiles
The price is for 1 lot including 11 sheets ( 11sq.ft). FREE expedited shipping !
If you need more than we listed, please contact us. We have more to offer. Thank you !
TST Mosaic Tile Specifications:
SKU# : GT213-G Sheet size: 12x12 In.300*300 mm Chip Size: 25*25mm Name: Gold Sun Material: Glass Color: Golden Surface Finish: Glossy, easy for cleaning Thickness: 4 mm Mesh mounted: Yes. Application: kitchen backsplash, bathroom wall, living room walls, bathtub, fireplace
Lead time: Ship out in 1-3 business days. 3-5 days for DHL or Fedex delivery.
Mosaic tile installation guide Mosaic tiles are small, usually 1-inch-square or less, ceramic or marble versions of their larger tile counterparts. Because they are so small, mosaic tiles are supplied on mesh backing in pre-determined color patterns. These sets of mosaic tiles, usually 12 tiles wide and 12 tiles long, make easy work of a mosaic wall tile installation. The flexible sheets of tile will quickly cover a wall, providing a durable, easy-to-clean wall surface. Once you learn the proper techniques, you can transform your wall with mosaic tile over a weekend.
Check the wall surface for nails or bumps. The wall should be clean and flat. Lay a drop cloth at the base of the wall. Remove any outlet or switch covers. Use a pencil, a measuring tape, a plumb bob and a 4-foot level to mark a 3-foot grid pattern on the wall. Use a chalk box to snap the lines on the wall. Mix the thin-set cement in a bucket or trough. Mix the cement according to the manufacturer's directions.
Start at a bottom corner and apply thin-set cement to that section of the grid. Use the flat side of the trowel to apply the cement, and then use the notched edge of the trowel to remove the extra thin-set and provide a "tooth" for the mosaic tile.
Press the mesh side of the sheet of tile against the thin-set cement. Knock the tile, gently, with the grout float to ensure the entire tile makes solid contact with the cement. Use a tape measure to measure from the edge of the tile sheet to the nearest chalk line, and adjust the tile sheet if necessary to bring it square by sliding it slightly with your hands. Use a straightedge ruler to make sure your grout lines within the sheet remain straight. Press the next sheet into place, using spacers if necessary to keep the grout lines between the sheets the same width as the grout lines within the sheets. Follow the same procedure as above for mounting the tile sheet, squaring it and keeping the grout lines straight.
Use the grout float to apply the grout to the tile. Press the grout into the grout lines, working both horizontally and vertically. Work in a 3-foot-square section at a time. After you have filled the grout lines, wipe the grout float across the tile at an angle to remove excess grout. Wait until the grout begins to dry. Wipe a damp sponge across the surface of the tile to remove grout from the tile surface. Use light strokes to avoid removing grout from the grout lines. Rinse the sponge often to keep the tile clean. Use an old T-shirt to remove any remaining grout haze after the grout has dried. Buff the mosaic tile with the T-shirt to remove the haze and shine the tile.
This installation is for your referance only. Thanks! Return&Refund 1.We will take full responsibility for products those in bad quality. If customers receive any defect tiles, we will send replacement or refund full money. 2.If customers want to return products with no reasons, they should cover the shipping cost for both ways. 3. All return or exchange products should be in good condition. 4. Full money will be refunded after we receive the returned products in good condition. Warranty 1. Life time limited warranty. (Products should be used in correct ways) 2. For broken issues, defect products, please check the quality and take some photos before you sign for it.
|