RCF NX 12-SMA
The NX 12-SMA Active Coaxial Stage Monitor from RCF is a powered monitor that can be used as either a floor monitor or mounted for use as a stand-alone PA for small venues. It is capable of up to 800-watts peak performance, providing output up to 129 dB SPL. The monitor has integrated DSP for limiting functions as well as a switchable EQ mode that provides optimized performance for stage monitoring or PA applications.
Coaxial Neodymium Transducers
The coaxial neodymium transducers are designed for audio quality and definition as well as a lightweight final system
Absence of Feedback
The advantage of coaxial transducers is the absence of feedback, and thanks to the coherent single spherical wave front with dispersion control, a wide ideal listening position
Single Neodymium Ring
The single neodymium ring magnet provides a high flux density and BL factor
Hyper-Vented Basket
Both of the transducers are equipped with a hyper-vented basket and magnetic assembly that provide heat dissipation and lower power compression
Amplification
The NX Coaxial Stage Monitors are provided with digital amplifiers with DSP processing
Input Board
The input board is equipped to configure the stage monitors for most stage situations, and includes:
XLR input and output
Jack input
Input sensitivity switch
Free field - floor switch
Status LEDs
Powercon AC input and output
Ergonomic Handle
Cabinets are made with Baltic Birch plywood and finished with a resistant paint for extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport
EQ
In order to control the response of the speaker in different applications, RCF has incorporated two Equalization Modes:
Floor, for stage monitoring
Free Field, for the use of the speakers as a stand-alone PA
1,400 Watt peak, 700 Watt RMS digital bi-amplification
129 dB maximum SPL
60° x 60° constant directivity horn
12" High power neodymium woofer, 2.5" voice coil
1.7 kapton dome, 1" exit, neodymium high frequency driver
DSP processing, floor field equalization, soft limiter and protection
Acoustical
Frequency Response 50 Hz to 20 kHz, -3 dB
Maximum SPL 129 dB
Coverage Angle Horizontal: 60°
Vertical: 60°
Driver Compression Driver: 1.7" (43 mm) kapton dome, 1" (25 mm) exit, neodymium
Woofer: 12 (305 mm) neodymium, 2.5" (63.5 mm) voice coil
I/O
Input Connectors XLR, jack
Output Connector XLR
Processor
Limiter Soft limiter
Controls Freefield, floor
Amplifier
Total Power Peak:
Total Power: 1,400 W
High Frequencies: 400 W
Low Frequencies: 1,000 W
RMS
Total Power: 700 W
High Frequencies: 200 W
Low Frequencies: 500 W
Construction
Material Baltic birch
Hardware 1x Pole mount/cap
Handles 1x Side
Grille Steel
Dimensions & Weight
Dimensions (HxWxD) 12.7 x 21.6 x 16.4" (324 x 550 x 417 mm)
Weight 36.3 lb (16.5 kg)
