Hypertherm Powermax 45 Plasma Cutting System

230volt Single Phase

p/n 088016

 Factory Reconditioned Hypertherm Powermax  45 plasma cutting system - near new appearance.  Comes with Hypertherm full 3 year warranty on the power source.  Cuts up to 3/8" thick material at 10 inches per minute with a maximum severance cut of 3/4".  Operates on 200 - 240v single phase power, 50/60hz. Uses clean, dry compressed air.  A great medium duty plasma cutter at an outstanding price.   Hand torch may be exchanged for machine torch or different cable lengths for additional charge.  Email or call for details - telephone 800-686-4674

Unit will ship by UPS -  $20 freight to any location in the 48 states. Email for rates to AK/HI/PR.

We are a 97 year old welding equipment distributor and a Hypertherm distributor and warranty repair facility.  Air filters, spare parts etc. available from stock and can ship free with the unit. 

Specifications

Specifications

Input Voltages
(± 10%)		 CSA
 200 – 240 V, 1-PH, 50-60 Hz
Input Current @5.95 kW CSA

 200/230 V, 1-PH, 34/28 A
230 V, 1-PH, 30 A
Output current 20 - 45 A
Rated output voltage 132 VDC
Duty cycle @ 40°C (104°F) CSA



 50% @ 45 A, 200 – 240 V, 1-PH
60% @ 41 A, 200 – 240 V, 1-PH
100% @ 32 A, 200 – 240 V, 1-PH

Open circuit voltage (OCV) 275 VDC
Dimensions with handles 16.75" (426 mm) D; 6.75" (172 mm) W;
13.7" (348 mm) H
Weight with 20' (6.1 m) torch CSA
 37 lbs (17 kg)
Gas Supply Clean, dry, oil-free air or nitrogen
Recommended gas inlet
flow rate / pressure		 Cutting: 360 scfh; 6 cfm (170 l/min) @ 80 psi (5.5 bar)
Gouging: 360 scfh; 6 cfm (170 l/min) @ 60 psi (4.1 bar)
Input power cable length 10' (3 m)
Power supply type Inverter - IGBT


Engine-driven generator operation

Engine Drive
Rating (kW)
System Output
(amps)
Performance
(arc stretch)
8
45
Full
6
45
Limited
6
30
Full


Cut Chart

Material Thickness Current Maximum cut speed*
inches mm
amps
ipm
mm/min
Mild Steel 10 GA
1/4
3/8
1/2
3/4
1
3
6
10
12
19
25
45
45
45
45
45
45
175
75
40
25
10
5
4445
1905
1016
635
254
127
Stainless Steel 10 GA
1/4
3/8
1/2
3/4
3
6
10
12
19
45
45
45
45
45
150
55
32
18
9
3810
1397
813
457
229
Aluminum 10 GA 1/4
3/8
1/2
3/4
3
6
10
12
19
45
45
45
45
45
280
100
42
25
10
7112
2540
1067
635
254

* Maximum cut speeds are the results of Hypertherm’s laboratory testing.
For optimum cut performance, actual cutting speeds may vary based on different cutting applications.
Refer to the operator manual for more details.