This kit comes with EVERYTHING YOU NEED EXCEPT THE GRAB BAR AND FLAP ,

 20- 3/16 RIVETS

4 - 3/16x1/3/4 RIVETS FOR MOUNTING FLAP

2- RIVET BACKERS FOR nEW STYLE FLAP TO MOUNT IT.

2- 10MM AXLE BOLTS TO PUT IN PLACE OF YOUR STOCK AXLE BOLTS

4-  8MM BOLTS TO MOUNT  GRAB BAR

LAST BUT NOT LEAST DETAILED INSTUCTIONS ON HOW TO DO THE JOB.

SO MUST SUPPLY THE GRAB BAR AND FLAP WITH THIS KIT

THE OTHER KIT ADDS AROUND 138.00 you'll get the Grab bar, Snow flap, and the caps for the Grab bar and the Caps to cover 4 rivets

For a total of 275.00 plus shipping

The listing is for the Original Boondocker Hardtail. I've been selling these since 2003 with great success. I sell anywhere from 150-250 a year to Dealers and individuals with no complaints. It takes 1-2 hours to install.

 I had one on my 800 for for 5 years, without running water wetter, and I had had a stock cooler. I put over 6000 miles on this sled in every condition a guy could get into.Four other "03" 600's that ride in our group had the same set-up.So overheating should not be an issue, keep in mind, the 03 doesn't have the best cooling even with the stock beavertail. Some people choose to put longer coolers on which is your choice, and you will gain cooling ability. For someone always in poor conditions this may be a good option. These sleds have been around awhile ,if you are already having cooling issues this will not cure it. T-stats go bad, antifreeze gets weak.   

 As far as strength, this is made of 3003 .090thick aluminum and with the special bends, it's strength far exceeds any other hardtail on the market without adding extra weight. You can lift it from the grab bar, stand on it, or Pull a sled out of the woods.

  I stand behind what I sell so if any question, problem, or complaints just get with me. I want you to be 100% satisfied. The only thing I can't control is shipping. So Please remember to give a Feedback. This lets me and other possible buyers know that you received your item and are happy. 

Another great site to look at is dootalk Tons of info and great people.

If you want a complete kit contact me.

Feel free to contact me. Don 989-277-5345

TOOLS NEEDED

• Vise grip C-clamps or regular C-clamps
• Drill
• 1/4 inch drill bit
• 3/16 drill bit.(optional drill is #11 )  This is very important, you want the rivets to have a tight fit. 

      A 13/64 inch drill bit is TOO BIG!

      It’s also not a bad idea to take a larger,like 3/8 drill, and lightly chamfer the rivet holes so rivet sets flat.

      Don't go crazy!!

• A good rivet gun
• A good Phillips screwdriver
• A file

MATERIALS NEEDED

• Snow flap and grab bar and bolts for MXZ 600, 700 or 800 (1999 to 2002)or any of the 04-07 REV stuff
• Small tube of black or gray silicone

• 20 3/16 x 1/2 long rivets for mounting tail
• 4 Large head 3/16 x 3/4 rivets for mounting snow flap
• 2 – 10mm axle bolts
• Detailed illustrated instructions

• I can get the parts to make a kit or you can get them which usually saves you.  I'm giving you the P/N s for the new style and the old style. Some of the stuff is optional.

  NEW Style 04-07 ( Not the tail light conversion.)

  520000449		Snow Guard
  520000453		Snow Guard Reinforcement  **Optional, I never use	**
  277000203		Cap (Black) ( Covers Rivets)
  518325216		Rear Bumper
  570063600		Wheel Cap

  OLD Style 2000-2002

  518322888		Rear Bumper (X) MX Z 600. MX Z 700. MX Z 800.
  572103803		Snow Guard
  572108200		Reinforcement  ** Optional, I never use**
  415073300		Cap  (cover rivets)
  570063600		Wheel Cap

  Keep in mind if I order the accessories they will be shipped to me and I have to add an additional shipping charge to you.   I usually try to make it cheapest by eliminating the middle man (which is me).  Remember I am not a Skidoo dealer, I’m just one of your fellow sledder’s that had one brain storm in my life that works.

• Shipping:

  
  Domestic shipping:
  I am happy to get your item to the post office within 36 hours after your payment has cleared.
  I ship products using USPS and UPS, therefore it could take up to 7 days for your item to be delivered using UPS or 2 to 4 days using USPS.
  I do not charge a handling charge.
  Local pickup available upon request.
  
  International shipping:
  I  only ship Priority International. I have no control of Customs. Most of the time it’s 4 to 10 days MAX. So please be patient.

   

  Communication:

   Always feel free to contact me; Don Green 989-277-5345 
   I try to check email frequently. If you do not receive a response to your question within 48 hours - it's possible I may not have gotten your email. If you would like to contact me by phone, my number is 989-277-5345.
  Feedback:
  I’m happy to leave feedback for my customers .  I  would appreciate that once you receive your item, you leave a feedback, it also helps the other guys see if my Hardtail is worthy of their sled .
  
  I strive to be a 5 star seller. Your feedback is critical to my success on eBay. I ask that you leave me a Positive feedback with all 5 stars, so that I can be set apart from my competition on eBay. If you feel that you cannot leave a Positive comment with all 5 stars - I WILL EARN IT. Please do not hesitate to contact me for any reason. I am here to exceed your expectations!