|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Up for sale is 100% brand new resin model GS-280 1/35 MSA-0011{Ext}
"Ex-S" Full MS Mode [ Version 2.0 ] with stand.
(1)(2)Full leg is supported internally by a
25x12mm rectangular metal bar at full length 420mm. It is to
support the weight of the leg and the wide open angle of 2 legs (800mm
apart). This also eliminate the need of external support for the
legs. Each leg is made of 204 parts.
(3) Thigh has been lengthen by 30mm. Width and depth has
also been adjusted accordingly. Stronger lower part can provide
greater support for the upper body.
(4) Rich patterns are added to the lower legs. There are 3
main types repair hatches, total 125 doors on all over the body.
Will show you open hatches mode in the future.
(5) We didn't forget about the Shoe sole, a lot of details and
patterns have been added to it.
(6) Light beam sabers on the hip side has been enlarged by 25mm x
10mm. This is to balance the lengthen legs.
(7) Based on the original design by Katoki, extra components have
been added at the back of the hip. Because of this, the hip has
been enlarged by 10mm in length and width.
(8) Behind the knees, it is in fact a large light box. We
attached silver suface gummed paper to increase the reflective effect
on the LED built inside.
(9) Sense of depth of the knees are strengthen. Metal parts
are added next to "INCOM" components.
(10) Steel bearing balls are added to the hip side in order to
give it a more realistic look.
(11) Full arm is supported internally by metal bar to provide great
posting support. We have added great details and layers to the
arms as well.
(12) Forearm armors are re-designed with enhanced details.
(13) Original details are maintained under the forearm.
(14) Shoulder base are constructed by multi-color cast. We
applied magnets to attach the outer blue armors to it.
(15) With lots of metal parts on the shoulder, you will see a
more realistic look of the shoulder.
(16) Propellant tank is supported by 4 @5mm metal bars.
(17) Side wings are extendable. Fully extended length is
415mm. Normal length is 360mm. We also added self-contained
blinking LED parts (battery, switch and LED) into the wings.
(18), (19) Based on our 1/100 design, the Propellant tank has
been added with new patterns and details.
(20) Connectors on the shoulder to the side wings have also been
enhanced.
(21) Metal bearing balls are added to the shoulder in order to
provide a more realistic look.
(22) Inside the shoulder, you will see 2 giant metallic HYDRAULIC
ARMS. An iconic design of Ex-S.
(23) Cheeks of the head has been thicken and lengthen to lower position
of the head. This produces a clearer outlook of the face.
(24) Tip of the mouth has been shorten and allow more space to
expose the nose. The face is more mask like now.
(25) Wires of the LEDs at the front and from the back are linked
together to a single plug for connection to the base at the neck.
(26) Armor at the chest are wide open to show more mechanics.
(27) If you see from the back of the chest, you will see the full
mechanics inside it.
(28) When the shoulder connectors are open, you will see massive
mechanics connected to those in the chest.
(29) We added large LED at the cockpit.
(30) Lots of details have been added to the air discharge duct of
the chest, including fan, metal parts and photo-etch blades.
(31) The burners of core-fighter are made of G-System electroplated
plastic. It carries metal free by itself without painting.
(32) Inside the exhaust of core-fighter, we maintain the original
fan design.
(33) The special design re-chargeable battery and power
transformer is powerful enough to provide powers to the LEDs for
several hours.
(34) We made the main wings based on 1/100 MG Ex-S. The
signal lights are self-powered. It contains the LED, LR41 battery
and on/off switch internally.
(35) Wires handing outside the body are to be connected to the
legs and back pack.
(36) Cockpit is open and close like design with moving arms
hidden inside.
(37) The empty abdomen is large enough for storing the battery.
(38) The back plate has been re-designed with lots of details.
(39)(40) When you look at the side of the cockpit, you will see
lots of details and patterns added to enhance the outlook.
(41) When charging is required, remove the small armour and plug
in the charger.
(42) We added lots of details into the shoulder hinge.
(43) The Beam Smartgun is made of 66 multi-color cast.
(44) The monitoring disc has built-in LED. Wires are
connected to the main body of the SmartGun.
(45) When you look at the side of the gun, you will see wires on
the top for connecting the monitoring disc. The wires below are
for the power source from the Ex-S body.
(46) Power wires are 18mm silver white weaves based on the
original design. If it was soaked in grey color, the effect will
be much better.
(47) At the end of the Beam Smartgun, we reserved space for the
photo-etch to show a more realistic look.
(48) New layers of details are added to both side of the Beam
Smartgun.
(49) Springs are added to the tip of the Beam Smartgun.
Product codes : GS-280
Overall height : 125cm
Head height : 94cm
Shoulder width : 66cm
Overall depth : 119cm ( when the tail stabilizer has been
stretched )
Kit weight : 42.5 kgs
No. of R2 “Red” resin parts : 21 pcs.
No. of Y1 “Yellow” resin parts : 51 pcs.
No. of B3 “Blue” resin parts : 93 pcs.
No. of W1 “Pure-White” resin parts : 199 pcs.
No. of W2 “Grey-White” resin parts : 12 pcs.
No. of G2 “Medium-Grey” resin parts : 68 pcs.
No. of G3 “Heavy-Grey” resin parts : 308 pcs.
No. of G4 “Dark-Grey” resin parts : 114 pcs.
No. of G5 “Blue-Grey” resin parts : 81 pcs.
No. of S1 “Silver” resin parts : 267 pcs.
No. of clear resin parts : 24 pc.
No. of heat pressed clear parts : 21 pc.
Dark iron coated alluminium-made burners : 4 groups
Basic-coated alluminium-made parts : 233 pcs.
Alluminium tube & rods : 9 pcs.
No. of polycap joints : 48 pcs.
Plastic rod : 1 pc. ( Ø5mm x 110mm )
Silver coated copper-made pins : 64 pcs.
No. of spring : 2 pcs. ( Ø6 x 80mm ;Ø8 x 200mm )
No. of steel bearings : 36 pcs. ( Ø3 x 3mm x 20 pcs.ï¼›Ø5 x 5mm x
16 pcs. )
No. of strip magnets : 14 pcs.
Special weavings : 1 pc. ( Ø16mm x 100mm )
Copper rod : 1 pc. (Ø1 x 90mm)
No. of hexa-screws : 177 pcs.
No. of rubber cord : 2 pcs ( Ø5 x 150mmï¼›Ø6 x 200mm )
No. of LED components : LED x 53 / 3.6V 1200mAH Ni-MH Battery x 1
/ Recharger x 1 / Band switch x 3 / DC jet / base x 15 / LR41 Batttery
x 8
o. of photo etch : 10 pcs
No. of A4 sized water decal sheet : 8 pcs
No. of 4R photos : 3 pcs.
Customised Model Stand
Overall diameter of the 3-arm stand : 780mm
Diameter of the core main base : 190mm
Height of the core main base : 96mm
Length of individual standing foot : 330mm
Assembled length of the chief supporting rod : 980mm
Overall packaging weight : 5.2 kgs
No. of basic resin parts : 7 pcs.
No. of G3 medium gray resin parts : 1 pc.
No. of P.O.M. cast parts : 3 pcs.
No. of metal mini add-on parts : 12 pcs.
Needle roller bearings ( Ø33mm ) with inner ring: 1 pc.
No. of solid alluminium rods ( all Ø20mm ) : 5 pcs.
( 490mm x 2, 215mm x 1, 260mm x 1, 62mm x 1 )
No. of hex-screws ( all Ø4mm ) : 15 pcs.
( 20mm x 9, 30mm x 6 )
4R product photos : 1 pc.
Painting and
assembly is required.
Parts
replacement
In case of any
ommission, unacceptable damages or quality over particular parts of
this model kit, please report to us within 7 days from your purchase.
Please don't forget to quote with the relevant "Product serial Number"
shown on the bottom of the gift box of the kit. For any ommission of
parts, please state clearly the related "Part Number" to be replaced.
For any unacceptable damages and quality of particular parts, apart
from stating the related "Part Number", please also send a clear
picture to us as an evidence.
|
|
|
|
|
Payment methods
We only accept payment by PayPal.
Combine payments
Multiple purchases made in different currencies may be shipped in same
parcel but will need to be paid separately. It is because eBay system
wouldn’t allow combining multiple currencies
purchases into single invoice.
Combine shipping discounts
We offer fixed combine shipping discount for multiple purchases. Buyer
who purchased 2 or more items can enjoy US$ 2 / GBP 1 / AU$2.2 / EUR 1
discount off for the shipping and handling charge of the 2nd, 3rd, 4th
items and etc.
As an example, if you won 3 items, each US$4 for shipping and handling
charge. The combine shipping and handling charge would be US$4, US$2
and US$2.
You may pay separately if you won items in different ebay sites. But
the calculation is the same. For example, if you won 3 items with
shipping and handling charges at US$4, GBP2 and AU$5. The combine
shipping and handling charge would be US$4, GBP1 and AU$2.8
NO combine shipping discount will be
offered AFTER payment is made.
Shipping and handling charge is NOT negotiable.
|
|
|
|
|
Shipping and handling
charge
Shipping and handling charge includes packaging, adminstration costs,
warehouse and distribution costs, not only postage. All Italy customers please contact us BEFORE
purchase.
Packaging
We will pack your item carefully with bubble wrap to avoid any damage
during transmit.
Shipping company
All parcels will be shipped by Hong Kong Post Registered Air Mail
Service.
Shipping Insurance
For shipping without insurance, we will not be responsible for parcel
lost, damaged or stolen during delivery. If you would like to avoid
these, please buy insurance.
Customs and Duties
a) Import duties, taxes and charges are not
included in the item price or shipping charges. These charges are the
buyer’s responsibility.
b) Please check with your country’s customs office to determine what
these additional costs will be prior to bidding/buying.
Shipping address
We only ship to address shown in your PayPal payment. We DO NOT
ship to any other address requested by email or eBay message.
Shipping time
Your order will be dispatched within 24-48
hours once payment is confirmed. Your package will usually arrive
within 7 to 14 working days. Shipping time varies on receiver’s
location.
However, for remote areas and certain
countries (e.g. Brazil, France, Italy), shipping time will be much
longer (more than 2 weeks).
|
|
|
|
|
Warranty
You can enjoy 7 days return guarantee of all products purchased from
us. We accept return of defective item in which damage is caused by
delivery company.You must notify us within 2 days upon receipt of the
product. No return wil be accepted after 2 days upon receipt of the
product. Replacement items or refund must be settled within 7 days from
the day the customers received the original item(s).Buyers are responsible for return shipping costs in
any cases.
** All return items must be in original new
condition, in original boxes, and with all paperwork, parts and
accessories. ** We are not responsible and do not accept any damaged
return items. Buyers must pack the return item safely.
** Please note that your original shipping
costs will not be refunded.
|
|
|
|
|
Contact Us
In order for us to give you the quickest service, please click “Ask
seller a question” link at the top of the listing and uncheck the “Hide
my email address” checkbox.
Email
Us
If you have any queries on our products, please feel free to email us
with your eBay userid and the
item number, we shall reply you within 24 hours.
Feedback
If you are unsatisfied with your purchase, please contact us BEFORE
leaving any negative feedback. We will try our very best to solve any
problem you may have. THANK YOU.
|
|
|
Please note that we have a strong policy of
sourcing genuine products.
Every product has been reviewed before listing on ebay.
If you find any of our products that may violate your Trademark,
Design or Patent Rights, please contact us immediately and
we will remove the corresponding listing(s) without question.
We guarantee that you will receive response from us within 24 hours.
|
|
|
|
|