5W Wifi Wireless Amplifier 5.8G WLAN BT Signal Booster w/Antenna 802.11a/n
This 5.8 GHz WLAN signal booster is designed for IEEE 802.11a/n wireless LAN applications. It adopts the direct sequence spread spectrum(DSSS) and orthogonal frequency division multiplexing(OFDM) technology of WLAN communication. The product is compatible with time-division duplexing(TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/WiFi devices,
Bluetooth, ZigBee and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate.
Features:
20X the power, improving the link quality and coverage of certified WLAN devices.
3.0dB ultra-low noise.
Wide 6-16V operating input range.
Working with certified IEEE 802.11a/n wireless LAN devices.
Simply plug and play, no software is required.
Specifications:
Frequency range: 5.725-5.85GHz
Operating voltage: 6-16V
Receiving gain: 15dB±1
Transmission gain: 20dB±1
Input trigger power: 0dBm(min), 10dBm(max)
Max output power(P1dB): 37dBm(5W)
EVM: 3％@29dBm 802.11a 54Mbps OFDM 64QAM BW 20MHz
DC supply current: 700mA@ Pout 29dBm 12V
Noise figure: ＜3.0dB
TX/RX switch time delay: ＜1us
LED indicator: Transmitter: green, receiver: red
Operating ambient temperature: -40℃~70℃
Operating humility: Up to 95％ rel. humidity
Item size: 8.2 * 5 * 2.1cm / 3.22 * 1.96 * 0.82in (L * W * H)
Item weight: 175g / 6.18oz
Package size: 26.5 * 16 * 6.5cm / 10.43 * 6.29 * 2.55in (L * W * H)
Package weight: 411g / 14.49oz
Applications:
Wireless LAN IEEE 802.11a/n access point clients.
Based on the 5.8GHz WLAN wireless base stations.
Based on the 5.8GHz WLAN wireless bridges.
Indoor distribution systems (multi-play) in the combiner.
Based on ZigBee, Bluetooth protocol wireless devices.
Installation Instructions:
Step1: Disconnect the power supply to AP/Router.
Step2: Detach the antenna from your certified wireless AP/Router.
Step3: Connect RG316 cable (included) to the booster and AP/Router.
Step4: Connect the antenna to the other end of the booster.
Step5: Connect the power supply to the booster first and subsequently the AP/Router.
Package List:C2084
1 * 5W signal booster
1 * Power adapter
1 * 20cm RG316 cable
1 * 5dBi antenna
1 * User manual (English)
Features:
20X the power, improving the link quality and coverage of certified WLAN devices.
3.0dB ultra-low noise.
Wide 6-16V operating input range.
Working with certified IEEE 802.11a/n wireless LAN devices.
Simply plug and play, no software is required.
Specifications:
Frequency range: 5.725-5.85GHz
Operating voltage: 6-16V
Receiving gain: 15dB±1
Transmission gain: 20dB±1
Input trigger power: 0dBm(min), 10dBm(max)
Max output power(P1dB): 37dBm(5W)
EVM: 3％@29dBm 802.11a 54Mbps OFDM 64QAM BW 20MHz
DC supply current: 700mA@ Pout 29dBm 12V
Noise figure: ＜3.0dB
TX/RX switch time delay: ＜1us
LED indicator: Transmitter: green, receiver: red
Operating ambient temperature: -40℃~70℃
Operating humility: Up to 95％ rel. humidity
Item size: 8.2 * 5 * 2.1cm / 3.22 * 1.96 * 0.82in (L * W * H)
Item weight: 175g / 6.18oz
Package size: 26.5 * 16 * 6.5cm / 10.43 * 6.29 * 2.55in (L * W * H)
Package weight: 411g / 14.49oz
Applications:
Wireless LAN IEEE 802.11a/n access point clients.
Based on the 5.8GHz WLAN wireless base stations.
Based on the 5.8GHz WLAN wireless bridges.
Indoor distribution systems (multi-play) in the combiner.
Based on ZigBee, Bluetooth protocol wireless devices.
Installation Instructions:
Step1: Disconnect the power supply to AP/Router.
Step2: Detach the antenna from your certified wireless AP/Router.
Step3: Connect RG316 cable (included) to the booster and AP/Router.
Step4: Connect the antenna to the other end of the booster.
Step5: Connect the power supply to the booster first and subsequently the AP/Router.
Package List:C2084
1 * 5W signal booster
1 * Power adapter
1 * 20cm RG316 cable
1 * 5dBi antenna
1 * User manual (English)
