RELM CommunicationsMODEL: RMUM45
FCC ID: IV9FNCU-M45
IC: 5327A-FNCUM45
This is what I found on the RELM Website below.
I only have one of these left.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
"The RM Series is full-featured FM transceivers designed for flexible mobile and base station business communications in the UHF Land mobile frequency bands. The RM Series mobile radios can be programmed with 128 channels. The RM Series include a 16 segment, 8 character, alphanumeric display for channel display. The channel frequency data is stored in an EEPROM and flash memory; thus, allowing the RM mobiles to be easily programmed by dealers using personal computers with the PC editing software."
FRONT PANEL All Buttons on the Front Panel are Programmable Function (PF) Buttons, configured according to your system requirements and can be programmed by your dealer. The instructions below refer to a typically configured radio. 1. VOL/PWR Knob Turn this control clockwise to switch the radio "on" and increase the volume. Turn it counterclockwise until a click is heard to switch the radio "off". 2. BUSY/TX Indicator Indicates transceiver Transmit/Receive Status Steady Red: Transmitting in progress Steady Green: RX/Busy Channel 3. UP/DOWN Buttons Pressing either button changes the current channel (and displayed name). 4. LCD The 8-character alphanumeric display shows channel names, status and identity information, and error messages. 5. Microphone Jack Connect the microphone plug to this jack. 6. [A]-[D] Buttons (Programmable Function Buttons) These buttons can be programmed by your dealer to be assigned for special applications for selecting High/Low power, Monitor, Talk-Around, etc as determined by your system requirements.
1. Antenna Socket The 50-ohm coaxial feed line to the antenna must be connected here, using a TypeM (PL-259) connector. 2. 13.8V DC Input Connector The supplied DC power cable must be connected to this connector. Use only the supplied fused cable. 3. External Speaker Jack An external loudspeaker may be connected to this 3.5mm audio jack. Caution: Do not connect either wire of this line to ground, and be certain that the speaker is capable of handling the audio output (4W) from the radio. 4. D-Sub 15-Pin Accessory Port Connector External TX audio line input, PTT (Push To Talk), and external RX audio Line output signals may be obtained from this connector for use with accessories such as data transmission.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This radio has been Bench tested for Power, Screen and Mic all tested the tested items work.
I do not program this radio you will have to program or have a professional program item.
The radio comes with a used mic as seen in the picture, no mounting bracket.
I have a total of two left of these radio's so if you need more then one let me know and I will list another auction with multiple radios.
----------------------------------------------------------------------------------------------------------------------------------------------------
Shipping: Item will be shipped via USPS Priority Mail Medium Flat Rate Box upper 48 states.
Return: ------- With this being a electronic item this radio is being sold as- no returns------
Questions : Please ask any questions prior to bidding or buying, I use the Ebay message system for all communications .
Payment: Paypal payment within two days of auction close.