UK Yongnuo YN-300 YN 300 LED Video Light for Canon Nikon Olympus Pentax Samsung

Product Information:

I. Product Structure

1.Reflector;
2.LED Bead;
3.Front IR Receiver;
4.Handle;
5.Battery lock catch;
6.Adjusting Screw;
7.Hot Shoe Fastening Knob;
8.Metal Hot Shoe Base;
9.Mini-type base;
10.Functional indication lamp;
11.Sensor;
12.Post-position infrared receiver;
13. Power switch/brightness adjusting rotary button;
14. Manual/automatic mode switch pushbutton;
15. Electric quantity testing pushbutton;
16. “SOS International Distress Signal” switch pushbutton;
17. Fine-adjusting switch pushbutton;
18. Brightness indication lamp.

II. Product Features

III. Method of Application

1. Battery Installation
 When the lithium battery is mounted, the battery is mounted to a card groove according to the arrow direction.
Compatible Batteries: SonyNP-F series
NP-F750;NP-F550;NP-F950/B;NP-F530;NP-F970;NP-F970/B;NP-F570;NP-F770;NP-F960;NP-F930;NP-F930/B;NP-F950;NP-F330.

2. Camera Lamp Installation
First fasten the lamp base to the bottom of the product with the adjusting screw and then adjust the angle of the lamp as needed.

3.The camera lamp can be fastened as follows as needed.

a. To SLR/Camera Hot Shoe
(1)Screw the Hot Shoe Fastening Knob to the top in the direction of the arrow)
(2)Insert the lamp into the camera/camera hot shoe base in the direction of the arrow)
(3)Tighten the Hot Shoe Fastening Knob in the direction of the arrow)

b. To Attached Mini Base Put on the Desktop or Other Flat Surfaces.
(1)Screw the Hot Shoe Fastening Knob to the top in the direction of the arrow)
(2)Insert the metal hot shoe into the mini base in the direction of the arrow)
(3)Tighten the Hot Shoe Fastening Knob in the direction of the arrow)

c. To Lamp Holder/Tripod
(Take out the quick release plate)
(Fasten the mini base to the quick release plate)
(Fasten the camera lamp to the tripod)

d. To the Attached Handle
(Fix the handle to the camera lamp) 
(Fasten the camera lamp to the lamp holder)

4. Start-up and manual mode
a.press the power switch and light the LED camera light; rightwards rotate to increase the brightness, or leftwards rotate to reduce the brightness;
(Brightness is adjusted by left and right rotations)
b. switch to fine-adjusting mode through C Fine pushbutton so that the brightness regulation is very fine; the camera light can satisfy your higher adjusting requirement.

5. Automatic mode
M Auto pushbutton is slightly touched, thus the mode is switched to the automatic mode; under the automatic mode, the brightness indication lamp is circularly lighted, the camera light can be automatically adjusted according to the environmental brightness. (Note: under the automatic state, the brightness cannot be adjusted manually and the camera light cannot be remotely controlled) 

6. Test of electric quantity
Bat pushbutton is slightly touched, electric quantity indication lamps are lighted in order; the displayed quantity is the rest available electric quantity, (Note: the rest electric quantity of test when the brightness is low is different from that of the test when the brightness is high, the service life is tested under the current brightness)

7. Special application----“SOS International Distress Signal”
SOS pushbutton is pressed, thus the functional indication lamp lighted at the left side is -“SOS International Distress Signal”; the functional indication lamp lighted at the right side is “Signal of Needing Help”; two indication lamps are lighted at the same time, which means “Distressed Signal Received”