- Multi-Layered Steel head gasket
- Intake manifold gasket (3mm thick)
- Exhaust manifold gasket
- Valve cover gasket
- Viton valve stem seals
- Camshaft front
- O-rings
- Front Seal Gasket
- Rear Seal Gasket
- Water Pump Gasket
- Timing Cover Gasket
- Other Small Gaskets
- Plenum Gasket NOT included
- 6 Pistons (Available in Standard and Oversizes: .50mm = .020")
- Complete Ring Set for 6 Pistons (Available in Standard and Oversizes: .50mm = .020")
- Wrist Pins
- Compression Ratio: Stock
- Bore Diameter: 96.80 mm
- 1st Group: 1.50 mm
- 2nd Group: 1.50 mm
- Oil Ring: 3.00 mm
- Complete Main and Rod Bearings
- Main Bearing Set (Standard or Oversize: .25mm = .010" or .50mm = .020")
- Rod Bearing Set (Standard or Oversize: .25mm = .010" or .50mm = .020")
- Please specify which bore size you want by leaving us a note during check out. There are other oversizes available please contact us for special order.
- Oil Pump
- Water Pump
- Timing Chain Kit
- 1 Timing Chain (60 links - silent type)
- 1 Crank Sprocket (21 teeth)
- 1 Cam Sprocket (42 teeth)
- 1 Timing Chain Tensioner
- Head Bolt Set
- 8 Long Head Bolts
- 8 Short Head Bolts
SKU#: FSGM20500, PSGM20500, MB7295A, RB4500A, OPMA038, TKGM20500, WP125-2101, HBGM20500
+ This engine rebuild kit is just what you need to keep your car
in good running order. The rebuild kit that you will receive in
this kit are high quality pistons that the dealers and rebuilding
shops use everyday. So do not settle for lesser quality parts
when it comes to engine repair.
+ This rebuild kit is designed for the professional installer.
It does not come with any installation instructions. If you do
not have a service manual, please consult a professional mechanic
prior to installing this kit.
+ Please refer to the listing pictures for an accurate description of the parts included in the kit.
