You are bidding on one Sony DVCAM/Mini DV player/recorder
second hand but only one owner and fully functional
purchased brand new for $2000
doesn't come with power cable, must get your own, its just a kettle lead
*refunds offered however customer must pay for return postage
** if item is to be posted, no responsibility will be taken if package isn't signed for or insured
The Sony DSR-25 is a DVCAM player recorder
specially designed to use in DV-based non-linear editing suites. With its 2-inch
LCD monitor built-in, using the machine is easy because important information
such as the recorded image, audio levels, and menu options are displayed right
where you need it. In addition, the DSR-25 offers one-touch duplication and the
ability to preset user bits and time code, all in a compact and lightweight
package.
DVCAM and DV Playback and Record
The DSR-25 offers functionality in the professional DVCAM format as well
as the consumer, ubiquitous DV format. Both formats have their advantages. DVCAM
offers superior picture quality and greater multi-generational dubbing
performance. The DV format offers longer recording duration (maximum 270 minutes
versus 180 minutes in DVCAM) and less expensive tape stock prices. This machine
lets the user to decide which features are most significant to the end
product.
- NTSC and PAL Switchable Operation
- When using the digital input, the DSR-25 automatically detects the signal
standard, NTSC or PAL. When inputting an analog signal, the machine has a manual
select switch on the back, which allows you to select the desired
mode.
- Easy Duplication Modes
- The DSR-25 has three duplication modes which can be set from the menu to
copy cassettes:
- Auto
Tape Copy with Cassette Memory Copy creates exact duplication of the original
tape without the blank segments, and duplicates the memory on the IC
chip.
- Auto
Tape Copy duplicates
the original tape without the blank segments without copying the IC chip
information.
- Manual
Tape Copy is used to copy the original tape from any position on the tape. The IC
chip data is not copied.
- Built-in LCD Monitor for Confidence and Set-up
- While editing, working images are displayed, audio level meters are
available, and system status can be shown to simplify the editing process. When
setting up the unit for operation, the LCD screen will display the menu
options.
- Sony's i.Link Interface
- The DSR-25 is equipped with a 4-pin i.Link (DV) interface based on the
IEEE1394 standard. The i.Link provides a digital link from the DSR-25 to a
variety of compatible equipment including Sony DVCAM decks and third party
nonlinear editors. Signals including video, audio, time code, and control can be
transferred through this port with virtually no degradation of image or sound
quality, which is essential in nonlinear editing. In addition, when a DVCAM
cassette with IC memory is loaded into the DSR-25, the ClipLink data recorded on
the cassette memory can be uploaded to a nonlinear system.
Signal System |
NTSC and PAL |
Format |
DVCAM |
Tape Speed |
28.193 mm/sec. |
Signal-to-Noise Ratio |
Not Specified by Manufacturer |
Maximum Recording Time |
184 Minutes |
Audio Signal Format |
16 bit / 48kHz |
Frequency Response |
20Hz to 20kHz |
Signal to Noise Ratio |
Not Specified by Manufacturer |
Input and Output Connectors |
FireWire- 4-Pin (x 1
input and output both) S-Video- 4-Pin (x 1
input and 1 output) Composite
Video- BNC (x 1 input and 1
output) Audio- RCA (x 2
input, 2 output) Control
L- Mini (x 1) Control
S- Mini (X 1) Headphone- Mini Stereo
(x 1) |
Power Requirements |
100 Volts to 240 Volts AC, 50/60 Hz |
Power Consumption |
16 Watts |
Operating Temperature |
41 to 104 degrees F 5 to 40 degrees C |
Dimensions (WxHxD) |
8 3/8 x 3 7/8 x 15 1/2 in. 212 x 98 x 392.8 mm |
Weight |
9
lbs. 8 oz 4.3 kg |