KODA 100 is a web-based Ethernet I/O Controller with real time remote control capability, email alerts of various user selectable events. It is built on TCP/IP platform with a built in web server which allows you to access, control and monitor your equipment over the Internet accurately and easily from anywhere. Supplied with up to 16 schedules which are constructed as IF ... THEN statements. IF this THEN do that. In addition the IF term can have 2 elements; IF this LOGIC this ... THEN that. This provides a simple to program and powerful way to take advantage of the data acquired by the KODA SERVER, gives you the ability to have one KODA control another. This capability built into all units allows you to use the input or relay on one device to control a relay on another device over a network, or to take a signal from your main location system, and trigger remote equipment in different locations. 

KODA 100 is a housed unit with a DIN rail mountable enclosure that can be snapped onto DIN rail or attached to any flat surface such as a wall or under a counter. It has 2 relay outputs (1-Form-A 110/220 10A) which can drive line voltage of devices, 2 optically isolated digital inputs. The digital input data can be used to calculate a range of results such as: 

State - This is useful for knowing if an input is on or off, like a door switch being on or off.

Counter- Non-resettable/resettable counter.

Frequency - Counts the frequency of an input in KHz (kilo hertz or1/1000 seconds). This could be useful in displaying a tachometer where 60Hz = 1 RPM.

Period - in 1/1000 seconds an input in kHz (milli-seconds or1/1000 seconds). This would be useful for measuring timed events. 

The KODA 100S is ideal for applications that require web remote control/monitoring such as security, access control, industrial equipment monitoring, building automation system, temperature & humidity monitoring, and much more.

We have posted some video tutorials on our website to show you how to use our TCP/IP devices, please visit our website linortek dot com Downloads/Resources page for more information. Below is one of our product feature introduction video for how to use relay output or digital input to trigger a remote device:

                                                                      Please check the product technical specifications below to pick the right one for your project.

Image and video hosting by TinyPic

What is in the box

Each product kit box contains the following:
•  One Web Controller
•  One 1M CAT5 (or better) Patch Cord
•  One 1A 12V Power Supply
•  One DIN Rail Mount Clip 
•  Getting Started Instructions

The Key Feature

Compact and self-contained: The KODA 100 is an all-in-one bell controller with the hardware/software you need to control your electrical devices/equipment. Use it out of its packaging, wire your devices/equipment with the controller, connect power and network with the provided cables, it’s ready to go.

Easy-to-Install: Use KODA 100 as either a network device or a standalone device. Install the KODA 100 anywhere on the network and do not require a direct connection to the PC. With POE (Power over Ethernet) enabled, KODA 100 is easy to install and connects through your Ethernet connection without the need for additional power, providing you tremendous cost-savings and flexibility when installing KODA 100 in your control system.

Easy-of-use: The built in web interface provides quick access to setup and manage your devices with no additional software or programming required. The removable wire terminal connectors simplify field installation and allows for easy troubleshooting and maintenance, the unit can be removed from the system without disturbing the system wiring.

Fully programmable: Supplied with up to 16 schedules which are constructed as IF ... THEN statements. IF this THEN do that. In addition the IF term can have 2 elements; IF this LOGIC this ... THEN that. This provides a simple to program and powerful way to take advantage of the data acquired by the KODA SERVER, gives you the ability to have one KODA control another. This capability built into all units allows you to use the input or relay on one device to control a relay on another device over a network, or to take a signal from your main location system, and trigger remote equipment in different locations.

Real Time Clock & Email Alerts: The KODA 100 controller comes with built in real time clock with NTP automatic Internet time setting, provides real-time monitoring capability, email alerts  of various user selectable events. 

Specification