Toshiba MK6014GAL 1.8" 60GB HDD For Panasonic/Sony-vidicon/Camera 1 year Warranty

 

Product info
Toshiba Storage Device Division introduces a new 60GB 1.8-inch Hard Disk Drive, the MK6014GAL. The MK6014GAL uses ATA-4 Interface and delivers a data transfer rate of 66MB/s. It increases the standard 512 bytes of data per sector to 1Kbytes which is needed for control structures, information necessary to manage the drive, locate data and perform other functions. In addition, to minimise noise emission and prevent compromising acoustic quality, the drive spins at 4200 rpm.

This new drive has been especially designed for ultra-portable consumer electronics devices. It features high-density, low power consumption, low acoustic noise and is only 54x71x5 mm.


 

Technical Specs
Name MK6014GAL

Features
Part number HDD1807
Formatted capacity 60,012 MByte
Form factor 1.8 inch
Interface type 1.8'' ATA (LIF)
Supported interface standards ATA-3 ATA-4 ATA-5 ATA-6 ATA-7
Head/actuator technology "Ramp-Load" Technology PMR (Write)/TMR (Read)
Shock detection Shock sensor circuit
S.M.A.R.T. The SMART command set is supported.

Physical parameters
Number of platters 1
Number of cylinders 74,880
Number of heads 2

Bytes/sector
Host 512
Disk 1,024

Access times
Average seek time 15 ms
Maximum seek time 26 ms
Track-to-track seek time 3 ms

Transfer rates
Internal From 180.1 MBit/s to 385.6 MBit/s
PIO mode (Host) PIO mode 4 (16.6 MByte/s)
UDMA mode (Host) UDMA mode 5 (100 MByte/s)
Rotational speed 4,200 rpm

Buffer
Buffer size 2,048 kByte
Cache Read-ahead cache Write cache


Reaction times
Start time, typical (Up to Drive Ready) 3.5 s
Start time, maximum (Up to Drive Ready) 20 s
Recovery time (from stand-by, typical) 3 s
Recovery time (from stand-by, maximum) 20 s

Reliability specifications
MTBF 300,000 Hours
Power-on hours/month <333 Hours
Product life 5 years or 20,000 POH (whatever comes earlier)
Seek error rate 1 error per 10^6 seeks
Non-recoverable error rate 1 error per 10^13 seeks
Preventive maintenance No preventive maintenance is required

Power consumption
Start (Maximum) 1.8 W
Seek (Average) 1.1 W
Read (Average) 1.0 W
Write (Average) 1.0 W
Low-power idle (Average) 0.3 W
Sleep (Average) 0.07 W
Stand-by (Average) 0.12

Power supply
Supply voltage +3.3 V (+/-5 %)
Allowable noise/ripple Max. 70 mV

Mechanical specifications
Drive width 54 mm
Drive height 5.0 mm
Drive depth 71 mm
Drive weight 0.048 kg
Drive orientation The drive can be installed in all axes (6 directions)