Description:

• 5 axis breakout board

1. Support of MACH3 and other computer software support for parallel port control.
2. USB power supply and peripherals powered phase separation to protect computer security.
3. Peripheral wide voltage input,12-24V, and anti-reverse function.
4. All of the input signal, all the optocoupler isolation to protect computer security.
5. 1 output to the relay output port, control spindle on or off. Output port P17.
6. 1 output through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
7. Break off 17pin to relay, which can be connect stepper motor drive, 5-axis stepper motor can be controlled.
8. P1 as PWM outputs can be controlled with optocoupler input spindle motor speed regulator .
9. Output pins with the expansion interface can 2.54mm pin 2.54mmXH-Block;

• TB6600 Single Axis Stepper Motor Driver

1. DC power input type:12V~40V;
2. Output current:0~4.5A, stepless adjustable;
3. Mircostep:1,2,4,8,16;
4. Automatic half current function: half or full current can be Selected through the switch;
5. Protect form : Overheated protection, over-current protection;

I/O Ports:

1. 24V+:DC power positive pole
2. GND:DC power cathode
3. A+ A-:Stepping motor one winding
4. B+ B-:Stepping motor other winding
5. CLK-:Stepping pulse input+5V (Rising edge effective , rising edge duration >10μS)
6. CW-:Stepping motor direction input, voltage level touched off, high level foreward , low level reverse
7. ENA-: motor free
8. +5V: Signal common terminal

• Stepper Motor

Model	57HS76
Number of phases	2-phase
Number of lines	4-wire
Phase voltage	3.08V
Phase current	3A
Resistence	1.1Ω
Inductance	3.6mH
Torque	1.89N.M(270 Oz-in)
Shaft Diameter	8mm
Axial length	21mm
Side length	57mm
High	76mm
Weight	1100g

• Switching Power Supply

1. the range of AC input voltage is changed by the switch
2. high-efficiency, high reliability
3. 100% full load burn-in test
4. Protections: Short circuit / overload / over voltage / over temperature
5. built-in cooling DC fan control
6. Working frequency is 25 kHz
7. Input Voltage:220V/115V
8. Output Voltage:24V
9. Output Current:10A
10. Output Power:250W

Package List:

• 1 x 24V/10A switching power supply
• 4 x 1 Axis TB6600 stepper motor driver
• 4 x 57HS76 3A 270 oz/in stepper motor
• 1 x 5 axis breakout board
• 1 x DB25 parallel cable
• 1 x USB cable
• 4 x signal cables
• 1 x CD

1. Item will be shipped within 1-2 working days after full payment is cleared. Tracking number will be sent to all customers upon package shipment.
2. Delivery time is different in accordance to shipping address and shipping methods.
   -Economy shipping from China: about 20-30 business days.
   -ePacket delivery (EUB) from China to US: about 10-15 business days.
   -Expedited shipping from China takes about 3-5 business days via DHL/UPS and 9-15 business days via EMS.
   -Standard shipping (Royal Mail Tracked) from UK warehouse to local customers: about 3-5 business days.
   -Standard shipping from US warehouse: about 3-7 business days.
   -Expedited shipping from US warehouse: about 3-5 business days.
   
3. Delivery time depends on destination logistics mode and other factors. If you have not received your shipment within 30 days from payment, please feel free to contact us. We will track the shipment and get back to you as soon as possible with a reply.

1. We accept payment via PAYPAL ONLY. We only ship to confirmed PAYPAL addresses. Please make sure payment address in PayPal is correct.
2. All major credit cards are accepted through our secure payment processor PayPal.
3. Payment must be received within 7 business days of auction closing.

1. 60 days money back return policy. If you are not satisfied when you receive your item, please return it within 60 days for a replacement or money back. Please contact us for return address before you send it back.
2. If item defective, In 3 months we will send you a replacement without extra charge, or offer refund upon faulty received. After 3 months you are still welcomed to send it back to us for exchange. Buyer may responsible for all return shipping costs.
3. In case you receive wrong products due to shipping error, please contact us for exchange or refund. If it's damaged, please refuse to accept and contact us as soon as possible.

Please email us before leaving any negative feedback or open any dispute on PayPal. We care about our valued customers, and will always try to help you. So if you have any problems, please e-mail us immediately. We try our best to reply to your emails as soon as possible. If you do not receive any reply from us, please check your email ensuring your mailbox has not reached full size. You can contact us by Ebay messages are strongly recommended.