TWO PACK (2 METERS)

NOW READ'S KWH (hours) so you can track Kwh's (HOURS) longer than any meter on the market.

SEE VIDEO BELOW

Wire size matters -

Amps can over-heat small wires

 

You are bidding on an all in one -

CUSTOM MADE WITH 8g WIRE

With custom programming

and heavy duty parts to take

220 Amps? Like no other meter.

Not the same as any of the others on the market

220 Amp/Volt meter data logger with Heavy 8 Gauge Wire!

CLICK HERE TO SEE VIDEO

Great for analyzing battery charging

Caution: Do not disconnect meter from  battery without first disconnecting wind turbine to prevent voltage surges

This meter is a RARE find with THE heavy 8 Gauge silicon wire

since most meters only use 14G wire and can't take high amps

at low voltages like 12 volts which is common in wind turbines.

Custom Made For The Wind Industry.

BACK LIT LED SCREEN FOR EASY NIGHT VIEWING .

All other meters only have 12G wires

and those can get VERY HOT when used on low voltage 6, 12 and 24 volt systems!

Make very sure that you buy the only meter on the market

made with heavy 8 Gauge wires. Buy ours or be sorry.

 

 

This all range Amp / Watt meter is also a powerful data logger that keeps track of AH Wh Vh Vm, load time and more. It also works on all systems including all 4 to 60 volt systems with a full voltage range up to 60 volts. It can also handle 220 amps surge and operate at 170 amps continuous. Works on all wind turbines, solar panels and hydro systems up to 60 volt DC input maximum. It can also work on AC three phase systems after the rectifier.

 

Also measures accumulated Amp Hours, Watt hours, Volt minutes and Watt production. Truly amazing to have so many features packed into this small meter.

FEATURES:

• Handles 4 to 60 volts. Works on 4, 6, 12, 24, 36, and 48 volt battery bank systems.
• Extremely low power consumption of 7 mA. More efficient than any LED meter.
• Digital LCD LIGHT UP screen gives clear crisp number readings. BACK LIT.
• Handles up to 220 amps intermittently and 170 amps continuous duty 6 volt (48 peak volts)
• Microprocessor controlled produces extremely precise and accurate readings.

Simply attach the four wires coming out of the all in one power meter and it is ready to use.

 

Specifications:

Voltage range 4 to ­ 60 volts (60 volts max.)

Current 0-220 Amps / 6V / 170 Amps continuous duty. 220 Amps intermittent duty.

Charge 0-65 Amp hours 0.001 Amp hours.

Power 0-6554 Watts 0.1 Watts.

Energy 0-6554 KiloWattHours 9 kWh.

1.  Ampere Hours (Ah)         The cumulative amount of charge delivered to your batteries.
2. Watt Hours (Wh)              Total energy or power delivered to your batteries or inverter. (AND Kwh)
3. Amperes Peak (Ap)          The highest peak or surge current made by your system
4. Volts Minimum (Vm)      The lowest battery voltage recorded (how low did it go last night?)
5. Watts Peak (Wp)              Highest recorded power surge (how much did my turbine make in that wind?)
6. Minute-Second Timer    (0' .00") 

 

 Watt Meter updates slower for easy viewing.   NOT FOR  USE UNDER 4 VOLTS