Selling my Fluke 96b Scopemeter. Don't really have use for it anymore. It is in great almost perfect condition. Screen doesn't have a scratch. Only flaw is the battery pack started leaking a little bit, take notice in the pictures. Turns right on with 4 size "c" batteries. Rechargeable battery packs can be bought cheap. Comes with power cord MANY different leads, cords, and cases as you see in the pictures. international buyers...please contact before buying for shipping costs

Features & Applications:

Modes

The Fluke 96B features three modes of operation. The first is multimeter mode. This displays standard multimeter information, including voltage, amperage and resistance. Multimeter mode is often used for troubleshooting simple electronic circuits. The second available option is oscilloscope mode. In this mode, the Fluke 96B displays a digital waveform. The digital oscilloscope mode is useful for analyzing complex digital circuits. A third mode combines the previous two modes and displays scope and multimeter functions on one screen.

Power

The Fluke 96B comes with a standard internal battery pack, which allows for portable operation. The battery pack contains nickel-cadmium (NiCAD) 4.8 volt power cells and can power the Fluke for up to four hours. The Fluke 96B can also be powered from an external source, using an 8 volt to 20 volt direct current (DC) power supply with a 5 mm plug.

Safety

The Fluke 96B is designed to meet International Electrotechnical Commission (IEC) safety standards and is UL-listed for electrical measurements up to 600 volts. The device features overload protection that stops electrical flow if 300 volts or more are detected. The Fluke also has surge protection that can resist electrical spikes up to four kilovolts.

Display

The display of the Fluke 96B is a digital monochrome screen with a zoom function. This zoom allows users to quickly focus on specific details of the oscilloscope display. The Fluke 96B oscilloscope screen play is capable of displaying data at 2.5 giga-samples per second (GS/s).

SCOPE MODE

Continuous Auto Set

Hands-free signal probing. Continuously follows input

signals from 15 Hz to 50 MHz and automatically selects the

proper time base, input range, and trigger level.

Min Max Envelope

Records the waveform excursions with a grey scale

envelope on both inputs.

40 ns Glitch detect

Sweep speeds 1 μs per division or slower on INPUT A.

Grey-scale display

Analog-like Grey-scale display.

Waveform Average

Smoothing up to 256 waveforms. 10 samples in Roll mode.

PowerAdvanced METER Functions

Touch Hold®, Change Alert™, Smoothing™, Continuity Beeper. Readouts in % change, % scale or delta-zero.

MIN MAX Trend Plot

Chart recording function to log MIN, MAX, and AVERAGE readings. Displays all 3 readings as graphs with time and date stamp. Automatic vertical scaling and horizontal time compression for recording from 120 seconds to 40 days.

 

Device Specifications:

Vertical

Bandwidth 60 MHz

Coupling AC, DC, Ground

Sensitivity 1 mV to 100 V/div (With included 10:1 probe measure up to 600 Vrms)

Modes A, -A, B, -B, A+B, A-B, X vs. Y

Vertical resolution 8 bits (256 levels)

Accuracy ¡¾(2% of reading +1 pixel)

Horizontal

Range 5 ns/div to 60 s/div (Fluke 105B and Fluke 99B)

10 ns/div to 60 s/div (Fluke 96B and Fluke 92B)

Acquisition modes Recurrent, Single shot, Envelope, Roll, Glitch detect, Average, ScopeRecord™

Maximum sample rate 2.5 GS/s for repetitive signals; 25 MS/s for single shot

Maximum record length Scope Record™

30k (up to 20ms/div-1 ch)

15k (up to 20ms/div-2 ch)

512 samples per channel (up to 5ns/div)

Accuracy ¡¾(-0.1% of reading +1 pixel)

Trigger

Source Input A, Input B, External

Modes Free run, Triggered, Single

Types Edge, Video, Event, N-cycle

Video Triggers on Field 1, Field 2, Lines or selectable line number

Interlaced video NTSC, PAL, PAL/M, SECAM, User selectable 2-Field or 4-Field sequence

Non Interlaced video Line selection up to 3200 lines

Line frequency 14 kHz to 65 kHz

Time delay Up to 20 divisions pre trigger view

Up to 640 divisions trigger delay

Cursor Measurements Up to 5 displayed simultaneously, Vrms (AC), Frequency, Vmean (DC), Risetime,

Vpeak-peak, Time between cursors, Vmax-peak, Time at cursors (Time of day or Time

from start), Vmin-peak, Phase dV between cursors, V at cursors. Measurements can be

scaled to Amperes. Readouts in % change or delta-zero.

Zoom Adjustable magnification. Allows full 30k record overview, or zoom in to single sample

resolution.

Memory Save and Recall

Setup Memories 20

Waveform Memories 10

Screen Memories 5

DC Voltage

Ranges 100 mV to 300V

(With included 10:1 probe measure up to 600 Vrms)

Accuracy ¡¾(0.5%+5 counts)

AC or AC+DC true rms Voltage

Ranges 100 mV to 250V

(with included 10:1 probe measure up to 600 Vrms)

Accuracy 50 Hz to 60 Hz ¡¾(1%+10 counts)

20 Hz to 20 kHz ¡¾(2%+15 counts)

5 Hz to 1 MHz ¡¾(3%+20 counts)

DC to 5 MHz ¡¾(10%+25 counts)

Additional Measurements

Continuity, Diode test, Amps, Hz, ¡ÆC or ¡ÆF, Pulse Width, Duty Cycle, RPM, dBm,

dBV, dBW, Audio or RF Watts. (Amps, ¡ÆC or ¡ÆF with Optional Probes)

General Specifications

Display Cold cathode fluorescent back-lit liquid crystal

Size 84x84 mm (3.3x3.3 inch)

Contrast and brightness User adjustable

Real-time clock Stamps Min Max TrendPlots and 30k records with time and date.

Power Line voltage adapter/battery charger included

Installed battery Rechargeable NiCad Pack

Operating time 4 hours typical

Charging time 21 hours typical

Alternate battery 4 Alkaline C cells

(user supplied) (non rechargable)Environmental

Mechanical Data

Size 60x130x260 mm

(2.4x5.1x10.2 inches)

Weight 1.5 kg (3.3lbs)