I modded this Powermac G5 case with Mountain Mods' back plate and back IO sheet. The case overall is in good condition, no major scratches and dent. But due to the age of the case, there might be some not obvious tiny dings or dropped paint. The way I mod is cut the hole out of the original G5 to fit the size of the black plate and then glue the back plate with JB Weld, sand it, paint it, make it look like the embedded original one. If you know Tonymacx86, then you will find the similar mod on the site. I keep the power plug outlets as original and the power supply inside is working. The front panel ports will be working as long as you have Aloha cable. But the front panel cable is not included. I have one new Aloha front panel cable for extra 35. What you need is one Aloha cable to make it work and you need one Firewire connector on your motherboard. You can see this link that inspires me this mod here. I didn't buy the motherboard tray simply because I just use the motherboard standoff as a cheaper alternatives, it is easy to mark your motherboard screw positions and then glue the standoffs. This is local pick up only in SoCal area. I spent a lot of time on modding this. This is complete mod and ready to plug and play. Please make a fair offer. Thank you for watching.