Year	Make	Model	Engine
00 - 01	Dodge	Dakota	4.7L 287CID V8 SOHC
Spec Note:(16 Valve) VIN Code "N" - JTEC Design
2002	Dodge	Durango	4.7L 285CID V8 SOHC
Spec Note:(16 Valve) VIN Code "N" - JTEC Design
00 - 01	Dodge	Durango	4.7L 287CID V8 SOHC
Spec Note:(16 Valve) VIN Code "N" - JTEC Design
2002	Dodge	Ram 1500	4.7L 287CID V8 SOHC
Spec Note:(16 Valve) VIN Code "N" - JTEC Design
02 - 03	Jeep	Grand Cherokee	4.7L 285CID V8 SOHC
Spec Note:(16 Valve) VIN Code "N, J" - JTEC Design
99 - 01	Jeep	Grand Cherokee	4.7L 287CID V8 SOHC
Spec Note:(16 Valve) VIN Code "N" - JTEC Design

• 8 Pistons                                            (Available in Standard and Oversizes:  .50mm = .020")
• Complete Ring Set for 8 Pistons  (Available in Standard and Oversizes:  .50mm = .020")
• Wrist Pins and Clips
  
• Compression Ratio:          Stock
  
• Bore Diameter:                  93.00 mm
• 1st Group:                           1.50 mm
  
• 2nd Group:                          1.50 mm
• Oil Ring:                                3.00 mm 
• Complete Main and Rod Bearings
• Main Bearing Set (Standard or Oversize: .25mm = .010" or .50mm = .020")
  
• Rod Bearing Set (Standard or Oversize: .25mm = .010" or .50mm = .020")
• New design Rod Bearings without locating tangs. These can replace old style Rod Bearings with locating tangs. Locating tangs are not needed for installation. "Crush" is what holds bearings in place to keep it from spinning. Feel free to consult any well-known bearings manufacture.
• Trust Washers
• Please specify which bore size you want by leaving us a note during check out. There are other oversizes available please contact us for special order.
• Oil Pump
• Water Pump with gasket
• Timing Chain Kit
• 1 Timing Chain (primary - 70 links)
  
• 2 Timing Chains (secondary - 106 links)
  
• 1 Cam Sprocket (right - 30 teeth)
  
• 1 Cam Sprocket (left - 30 teeth)
  
• 1 Crank Sprocket (25 teeth)
  
• 1 Idler Sprocket (primary - 50 teeth)
  
• 1 Idler Sprocket (secondary - 30 teeth)
  
• 1 Tensioner (primary)
  
• 2 Tensioners (secondary - left and right)
  
• 2 Guide Rail (secondary)
  
• 2 Guide Rail (tensioner arms)
• Head Bolts Set
• 20 Long Head Bolts
• 8 Short Bolts
  

SKU#:  FSGM30400 w/OPG, PSMI047-EVE, MB8284, RB8002, TW7214-EVE, OPMI047, TKMI047E, WPMI047, HBGM30400

+ This engine rebuild kit is just what you need to keep your car in good running order. The rebuild kit that you will receive in this kit are high quality pistons that the dealers and rebuilding shops use everyday. So do not settle for lesser quality parts when it comes to engine repair.
+ This rebuild kit is designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this kit.
+ Please refer to the listing pictures for an accurate description of the parts included in the kit.