AU19 HHO Dry Cell Setup and Tips - YouTube
Video will open in a new window
HHo torch melting glass fuse demo - YouTube
Video will open in a new window
This is for 1 43 Plate HHO Dry Cell, ready to connect to your hardware and plumbing.
This is a brand new, never used 43 Plate HHO Dry Cell. This Dry Cell is designed for automobiles with smaller engine compartments, where space is limited. It can however be used anywhere else of course, including adding multiple cells together in a chain to increase production.
This Dry Cell is can to produce 6+ LPM of HHO at 80-90 Amps current using 12-14v DC using a PWM. There are 4 series of Pos/Neg blocks within this cell, each able to produce more than 1.5 LPM each series / 1.5X4.
The AU43 is Similar to the Big GA43 I sell, but in a smaller form factor, for auto's that need higher HHO production, but lack the space to mount large cells.
This Cell Comes Assembled and never used. All plates and components of this cell has been cleansed and assembled.
If you have any technical question, or would like any tips on improving the production of a dry cell, feel free to ask.
| Dimensions & Specs | |
| Model # | AU43 |
| Manufacturer | Fuel Cell LLC |
| Length: | 7" / 9" Including fittings |
| Height: | 5.75" / 7" W/Terminals |
| Width: | 3.5" |
| Surface Area: | 1075" Sq *More than 2X the reactor area of other cells in this price range! |
| Hose Fittings: | 3/8" NPT - 3/8" Barbed for 1/2" Hose (Can be swapped out in seconds for your own needs) |
| Optimal Performance: | 12-14 Volts DC (Automotive), 40-100 amps @ 12-14v DC W/PWM |
| MMW: | 6 to 7 MMW avg |
| Arrangement | +NNNNN-NNNNN+NNNNN-NNNNN+NNNNN-NNNNN+NNNNN- (5 Neutral) |
| End Plates | High Tensile/High Heat CPVC 1/2" - Many times the strength of cheap acrylic and chemically resistant |
| Ship Weight | 6LBS |
| Efficiency | Less current loss while better
utilizing current balance through the cell due to configuration. This allows for more production
for each amperage consumed by the dry cell. Average efficiency is apx 20%-25% more then run of the mill cells. |
| Use only "Potassium Hydroxide (KOH)" with
"Distilled Water". Yes, I've actually
had someone use the wrong chemical in an HHO Dry Cell and the result was that
customer was not producing HHO at all, just steam and toxic gases. So I thought
I would clarify this. the customer never asked a question, so I never heard a
word until after the fast. Can't help someone if the question is not asked. How Much Potassium Hydroxide to use: A great mixture volume is 20% KOH (Potassium Hydroxide). This mixture will have the best amperage draw, and thus produce the most amount of HHO for volt/amperage. For very harsh cold environments, it is perfectly safe to increase the volume of KOH to 28%. To determine the right mixture, 20% KOH by weight = 27 ounces of KOH per 1 Gallon of Distilled Water. Do not use baking soda, sodium hydroxide, tap water, salt water, lye, or other chemicals. Only potassium hydroxide. Some of these have inefficient production values and some are very caustic (corrosive). A great tip for HHO dry cells, add a little bit of Anti Foam, which can be found in any spa/jacuzzi/hot tub supply store. Do not mount HHO dry cells next to an exhaust on a vehicle. The exhaust can reach 600f easily and that is dangerous. Best mounting positions for an hho dry cell is low in a fender well, in front of the grill down low behind the bumper, etc. |
***Free Shipping Within the United States***
This Fuel Cell is Shipped USPS With Tracking Number
This Item Ships Direct Within 24-48 Hrs of Purchase.
Cautions: Hydrogen is highly explosive. Use extra care during cell operation. Keep away from open flame. Do not touch or be near the hydrogen cell when in operation.
Disclaimer: You must be age 21 and over to handle hydrogen devices. When purchasing this device, you are held responsible for any damage that may accrue during installation or operation of this unit. Fuel Cell LLC is not held liable and holds no responsibility for any personal harm or property damage.
Shipping: This item will ship within 24hrs - 48hrs of payment verification. *Canada, Note: Shipping to Canada is precisely using UPS Ground, shipping cost is the exact amount between USPS postage within the United States and UPS Price to ship to Canada. Actual UPS Ground is $33, I am charging $25, so yes, you are getting a good deal :)