| | Feature: - The water flow sensor is applied for water heater, imprinter, automatic water machine, and other flow metering equipment.
- With stainless steel ball inside of the impeller, wear-proof
- Up and down structure stress applied for the seal ring, avoid to leak
- with imported Hall element, and adopt pouring sealant encapsulation to avoid to leak and age
- Install vertically, angle of inclination should not be exceeded 5 degree
- Medium temperature should not be exceeded 120degree
Wiring: - Red - In - Connect positive
- Yellow - Out - Signal output
- Black - GND - Connect negative
Technical Parameters: - Working range: 0.3-6L/min
- Water pressure: ≤0.8MPa
- Minimum rated working voltage: DC4.5 5V-24V
- Maximum working current: 15 mA(DC 5V)
- Working voltage range: DC 5~18 V
- Load capacity: ≤10 mA(DC 5V)
- Operating temperature range: ≤80℃
- Operating humidity range: 35%~90%RH (no frost)
- Storage temperature: -25~+ 80℃
- Storage humidity: 25%~95%RH
- Size (L x W x H): Approx. 5.8 x 3.4 x 2.7cm / 2.28 x 1.34 x 1.06 inch
- Output interface diameter: Approx. outer 7mm, inner 3mm
|