The Malone DX3000 is a powerful PA amplifier that gives your audio signal the power required when working with a large audience. The amp is fed with sound through two RCA input jacks and two 6.3 mm audio inputs. The connection to the speakers is made by feeding the audio signal either through the two NL4 outputs, the two 6.3 mm jacks or the screw terminals, making the DX3000 a versatile amp for a variety of locations and connection situations.
Every audio channel is equipped with the ordinary 1500 watts. The output power of each channel can be easily configured using the two handy front panel knobs. The amplifier can be operated in so-called bridge mode with only one channel as an alternative to the two-channel stereo mode. Changing between the two variants is easily done with a switch back and forth. The performance of this one channel is doubled accordingly and pushes the audio signal to the speakers with a powerful 1500 watts. Sonically, we should not be afraid to push the performance of the amplifier because even at the highest levels, the DX3000 produces a very clean sound.
For the case of internal ground loops and hum the circuit of the device can be very easily separated from the crowd with the Ground Lift Switch. The casing of the DX3000 offers a clean design that accurately represents the force of the booster. It is made entirely of metal and is easily loadable on a 48cm (19") rack installation.
Top Features :
- PA amplifier with 3000 watts maximum power (2 x 1500W at 4 Ohms, 2 x 900W at 8 ohms, 3000W Bridge-power at 8 ohms)
- Suitable on 48cm (19") rack installation - 2 rack units
- Bridgeable - 2/1- channel operation
Features:
- Inputs: 2 x 6.3mm jack, 2 x RCA
- Outputs: 2 x NL4, 2 x 6.3mm jack, 2 x screw terminal
- Two large, ergonomic knobs for easy adjustment to the desired level
- Ground/lift switch
- Resilient metal housing
- Channel by channel adjustable volume
- LED indication for clipping and backup
- Frequency range: 10Hz to 20kHz
- Damping factor:> 250
- S/N Ratio:> 90dB
- Slew Rate: 30V/uSec
- Input sensitivity: 0.77 V
- Input impedance: 20k ohms
- Total harmonic distortion: <0.1%
- Supply voltage:
- Power button
- Power supply: 220V/50Hz
Included :
- 1 x device
- English manual (other languages: German)
Dimensions:
- 48.2 x 8.8 x 31.4 cm (WxHxD)
- Weight: about 9 kg