Peugeot 106 GTi 205 GTi 206 306 309 GTi Rear Brake caliper slider pins (2) 11021
Bigg Red Ltd
Specialist Brake Caliper Remanufacturer
Brake Calipers
Brake caliper repair kits
Brake caliper pistons
Caliper Slider bolts
Master cylinder seals
Bleed Screws, Pad pins and accessories
You are buying
2 Rear Brake Caliper slider Pins
to fit
| Model | Engine | Data | Year | Year | Caliper |
| 106 | 1.6 Gti & Rallye | All | 1996 | Bendix | |
| 205 | 1.9 Gti Cti | All | 1987 | 1997 | Bendix |
| 206 | All with rear disc | All | 1998 | Bendix | |
| 306 | 1.8 2.0 Gti Xsi S16 | All | 1993 | Bendix | |
| 309 | Gti | All | 1987 | Bendix |
Information
These calipers use 2 pins on each caliper
| Total length |
62.5 MM |
| Tip to Tip | |
| Main body diameter |
20 MM |
|
End One |
Hollow 12.4 MM ID |
|
End Two |
Hollow 12.4 MM ID |
Customer information & satisfaction
Please note that our slider bolt/pin pictures are actual pictures.
This is what you will receive if you order, every component in the picture.
If it is not in the picture it will not come with your order
Sticking, sluggish or overheating caliper?
It may not be the caliper. Rusted & sticking slider pins/bolts will prevent the caliper from floating freely and can seriously effect your braking
Identification help
Due to motor manufacturers policy of fitting more than one make of caliper to the same vehicle
it may be necessary to confirm the make of caliper fitted to your vehicle.
All caliper manufacturers stamp there name into the casting on the reverse side to the piston. Obviously it
may be necessary to clean to make visable.
We always include the sizes of our pins and bolts for you to check against.
If in doubt as to the suitability of any bolt/pin or you also require slider rubbers, please contact customer services prior to purchase.
Please see contact details below
online shop.
PayPal accepted
Bigg Red Ltd
Weir Lane
Worcester
WR2 4AY
Customer services; 01905 428793
Opening hours
Mon - Fri
9.30 - 5.30
Powered by eBay Turbo Lister
About Us
We are a family owned specialist Brake Caliper remanufacturer offering a rebuild and bespoke coating service to over 3000 different calipers. If you prefer to do the job yourself, we have Thousands of Seals, Pistons, Bleed Screws & Slider Bolts on the shelf for immediate dispatch. Our dedicated and knowledgeable staff have many years of motor industry experience to help advise you through selection and fitting.
Payment
Paypal payment preferred but all major Credit/Debit cards are acceptable
Shipping
Smaller components are sent Royal Mail first class, if ordered before 1pm ( Mon - Fri ) they will be collected by Royal Mail that same day. Larger components are sent via 24/48 hours carrier. This applies only to UK mainland excluding Highlands and Islands and excludes Sat/Sun. For all other destinations please contact customer service for price and delivery information, prior to purchase.
Terms
All items must be paid for in full prior to dispatch
Returns
We operate a no quibble returns system for all goods returned unused and in perfect condition within 2 months of purchase providing you have proof of purchase. Dirty, damaged and incomplete items will not be refunded and only the cost of the goods is refundable not the postage.