|
DENON PMA-1600NE
Integrated Amplifier
BRAND NEW - UNOPENED - WARRANTY
The
amplifier is coming with the power cable, provided with "Schuko" plug.
Using a regular and inexpensive adapter, this technology allows the
amplifier to be used in the UK, in order to plug the "Schuko" to your
wall socket. It is important to consider that the amplifier cable can be
plugged and interchangeable from outside (like the same that you use
for your computer). You can safely use the amplifier by plugging a
cable suitable for the English electricity network.
Denon
is one of the rare audio brands that continued to actively develop
Hi-Fi components and accumulate, refine, and pass down Hi-Fi audio
technologies. The performance of the PMA-1600NE goes well beyond that
of Denon’s previous PMA-1500 series. With its ultimate built-quality,
unique Denon technologies and state-of-the-art connectivity, the
PMA-1600NE truly is a masterpiece of sound technology. Thanks to the
rear USB-B input and embedded high quality D/A converter, the PMA plays
high resolution files up to 384kHz/32bit and DSD up to 11.2MHz from a
computer in impeccable sonic quality. For the best performance from
analogue inputs, the PMA-1600NE features an Analog Mode which allows to
switch off all unutilized sections like the digital input circuitry or
the low noise display for an unaltered audio reproduction.
State-of-the-art Denon Solutions
2 x 140 W (4 ohm) output - Enough power even for big rooms
Advanced
Ultra High Current (UHC)-MOS Single Push-Pull Circuit Power Amplifier
with Schottky barrier diodes - Wide bandwith sound from deep bass to
detailed highs
DAC Master Clock Design - Jitter-free audio reproduction
Rear USB-B input - High Resolution Audio playback up to 384 kHz / 32 bit and 11.2 MHz DSD
Digital
isolator to eliminate high-frequency computer noise on the USB-B or
digital inputs - Enjoy all sources without any unwanted electric noise
FL display for source and sample rate indication - Easily capture most important information
Analog AMP Mode switching off digital audio circuitry and display - Pure analogue audio reproduction
Advanced AL32 Processing Plus - Digital recordings beautifully faithful to the original sound
Direct Mechanical Ground Construction - Minimizes unwanted vibration
Chassis construction with 6 independent blocks - Eliminates noises between the circuits
Main transformer with separate power supplies for analogue and digital circuits - Preserves audio signal purity
2
Digital Optical and 1 Digital Coaxial inputs; High performance MM &
MC Phono Equalizer Amp - Ready for music from all sources
features
number of channels - 2 UHC-MOS SINGLE PUSH PULL CIRCUIT
DIGITAL IN - USB-B, 2 X OPTICAL , 1 X COAXIAL LC MOUNTED TWIN TRANSFORMER
USB-B DSD AUDIO STREAMING (DOP): DSD2.8 / DSD5.6 - <=11.2 USB-B PCM SAMPLE RATE - 384 KHZ / 32 BIT
HIGH CURRENT DYNAMIC POWER SUPPLY DAC CHIP - PCM1795
POWER AMP DISCRETE CONSTRUCTION ASYNCHRONOUS MODE REAR USB
MICRO PROCESSOR AUTO OFF BIT-PERFECT TRANSMISSION
SOLID HEAT SINKS (SEPERATE) AL 32 PROCESSING - ADVANCE AL32 PLUS
SOURCE DIRECT POWER AMP DIRECT
ANALOG MODE STREAMING AUDIO FROM PC
INPUTS/OUTPUTS
AUDIO INPUTS - 4 POWER AMP DIRECT IN
REMOTE CONTROL BUS IN / OUT PHONO INPUT: MM/MC
GOLD PLATED CINCH HEADPHONE OUT
AUDIO INPUTS - 1 NUMBER OF TERMINALS - 2
SPECIFICATIONS
OUTPUT POWER 8 OHM (20 HZ - 20 KHZ, T.H.D. 0.07%) - 70 W INPUT SENSITIVITY: MC - 200 µV / 100 OHM
TREBLE CONTROL - ± 8 DB AT 10 ZHZ BASS CONTROL - ± 8 DB AT 100 HZ
OUTPUT POWER 4 OHM (1 KHZ, T.H.D. 0.7%) - 140 W SIGNAL TO NOISE RATIO: MM/MC - 89 DB / 74 DB
TOTAL HARMONIC DISTORTION - 0.01% INPUT SENSITIVITY: HIGH LEVEL - 125 MV / 47 KOHMS
INPUT SENSITIVITY: MM - 2.5 MV / 47 KOHM SIGNAL TO NOISE RATIO: HIGH LEVEL - 108 DB
GENERAL
AUTO POWER OFF DETACHABLE POWER CABLE
MAXIMUM DIMENSIONS (W X D X H) IN MM - 434 X414 X 135 WEIGHT IN KG - 17.6
POWER CONSUMPTION IN W - 295 REMOTE CONTROL: RC-1213
| |
|