photo cb_header_zps8djpes79.jpg
CMBKF-1 Love Jugs Flat Black Coolmaster V-Twin Engine Cooling System with
Vibration Master and the Frame Mounting Kit
Fits Years 2013-Older Harley Road Glides, Street Glides, Road Kings, Tri Glides, and Ultras (fits Harleys that have the cowbell style horn mount)*See fitment notes below

 photo pcv_zpss3uhy6ch.jpg

CMBKG-1 Love Jugs Flat Black Coolmaster Engine Fans plus the vibration mount kit and the frame mount kit for all 2013 & Older Harley Motorcycles that have a cowbell horn mount. ***SEE OUR NOTE BELOW IN REGARDS TO DETERMINING IF THE FRAME MOUNT KIT WILL WORK FOR YOUR MOTORCYCLE***(Image shows Love Jugs installed with the Frame Mount Kit).  By purchasing this kit with the additional mounting options you are optimizing the longevity of the fans by eliminating most of the vibration. These fans offer style and power that takes controlling the excessive heat produced by your Harley to an all new level.  Love Jugs and the vibration master kit fits all Harley Twin Cam models Softail, Dyna, FLH/FLT Touring and Tri-Glide Models, however, the Frame Mount Kit is only for Touring models that do not have the stabilizing rod on the horn mount.  Love Jugs sit at precisely the optimum placement to concentrate the LOVE JUGS powerful air streams, at the hottest area of your engine’s cylinders. Only a two fan system can properly direct the air to the critical heat producing areas; and only Love Jugs has the power to do so very effectively.  They exclusively use stainless steel because, unlike the other painted or chromed metals, it will never blister, chip. or rust. Ten years from now LOVE JUGS will still look brand new.  LOVE JUGS fans are twice as powerful than their nearest competitor. In addition, they are 100% waterproof!  It has been proven and well  known that a LOVE JUGS cooling system will lower oil temperatures, which dramatically increases oil pressure especially at idle, due to the cooler operating engine temperatures of LOVE JUGS equipped bikes. Increased oil viscosity due to cooler oil is critical for the longevity of your engine.
  • This system uses a low amperage draw to operate.  It uses a maximum of 3.2 Amps
  • LOVE JUGS manufactures the most powerful, and by far the most effective, high performance, waterproof fans available
  • Love Jugs are designed and manufactured to be the highest quality in every regard
  • Love Jugs are by far the most powerful and effective cooling system available
  • It has been proven and well  known that a LOVE JUGS cooling system will lower oil temperatures
  • 100% waterproof! They will actually run while submerged underwater!
  • On/Off switch on front of the fans so you can turn them off and on when needed
  • Love Jugs are rated for a minimum of 20,000 hours of life. The manufacturer offers a full year 100% warranty on electrical components and three (3) year warranty on all other parts
  • ALL 2014-Newer FLH/FLT Touring motorcycles must have the 8 Pin Adaptor plug in order to install this product.  See our listing for these newer years if your motorcycle is 2014-newer.
  • This kit includes the Vibration Master Mounting Kit.  The V-M is an attractive and Heavy Duty method of mounting your Love Jugs to your engine via the Harley horn mounting bracket. It’s a real work horse. Two heavy duty vibration dampers encased in a highly polished Stainless Steel enclosure, replaces the stock Harley vibration damper. The V-M is guaranteed against any type of failure for 5 years by the manufacturer.  This kit is superior to mounting your Love Jugs directly to the Harley horn mounting bracket. The V-M positions your Love Jugs perfectly for maximum cooling effectiveness. Installation time is about 5 minutes. Will still look perfect 10 years from now due to the Stainless Steel construction of the Vibration Master and greatly reduces the vibration to your Love Jugs increasing their longevity.
  • The Frame Mounting Kit is also included in this kit for FLH/FLT Touring motorcycles that do not have a stabilizing rod in the center of its horn mount.  Some 2008-2011 year models have this rod that prevents the Frame mount kit from being installed.  Harley moved the stabilizing rod to the front of the frame for 2012-newer bikes.  ****See our image below to determine if you can use the Frame Mount Kit on your motorcycle****  If your bike has the stabilizing rod on the horn mount then see our other listings for the fans without the of frame mount kit. 

Watch this video and see for yourself.  As they say, seeing is believing!




PLEASE CALL US AT 877-871-0053 WITH ANY QUESTIONS