eBay

Product Video: Smartphone control relay TOSR04 Measure tempreture via wifi and bluetooth

http://www.youtube.com/watch?v=iVJF5KjVFds

This is a WIFI Relay remote control kit. Including

1x 2 Channel USB/Wireless Relay Module (Temperature Sensor Support )

1x Wifi bee module

1x Water proof DS18B20

1x Mini usb cable

Find out which kind of relay you need here:

TinySine Relay Module List （copy the URL and paste to your web browser):

http://www.tinyosshop.com/download/Relay%20Module%20Series.pdf

Description:

First,this USB/Wireless Relay Module allows computer control external devices ON/OFF via the computer USB port..

Furthermore, It has a wireless extension port, can work with XBEE or Bluetooth Bee or Wifly Module, that mean now you can control your device via zigbee or Bluetooth or WiFi !

The TOSR08-T module can powered by USB bus or DC power and provides four volt free contact relay outputs with a current rating of up to 10 Amp each.

It provides a DS18B20 temperature sensor port. You can use it make thermostat or any other similar application and so on.

Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.

A full datasheet for the relays used on the TOSR04 is here: G5LA datasheet

If you use DC Power ,the Input voltage should be DC5V.

First Step - Install the Driver
The TOSR04-T module uses FT232RL USB to UART chip . Before using the TOSR04-T you will need to download the FT232RL Driver.

Connect the TOSR04-T and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.

The TOSR04-T will now appear as a com port.

Commands
The TOSR04-T operates with an easy to use command set as described in the table below.

TOSR04-T Baud rate : 9600

Test program and example source code
To get the TOSR04-T up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.