Easy to apply to most garments with a home iron or heat pressing machine.
Can be applied too (T-Shirts, Jeans, Tote Bags, Hats and more).
All Rhinestones are made of Crystal Stones.
Application Directions
- Gently place hot-fix transfer sticky face down on garment.
- If it's not in the right position lift up gently and reposition. Then press lightly with your hand to make sure it stays in place on your garment.
- Place the Teflon sheet or cotton cloth (Pillowcase) over top of the design.
- Iron directly on top of the cloth/Teflon sheet for a minimum of 25-30 seconds.
- Do Not Move Iron around as stones may shift. Rather press and Hold then up and down to cover the surface.
- Gently peel up corner to check if stones are sticking. If not, repeat for another 10-15 seconds.
- This is the tricky part - If stones not sticking you are not melting the adhesive. If over ironed Glue will lose it's adheasive And if iron is too hot you can burn through fabric.
- Some recommend to turn garment inside out and repress for about 10 seconds so the glue will draw into the fabric of garment.
- Here's some more bits of info for you: Irons with steam holes will lose abit of surface contact. Heavier fabrics might need more time, thinner fabric less time.
- Peel Off Rhinestone Iron on Transfer gently
- Hang garment for 15 minutes to assure glue is dry
- Yeah!, YOU DID IT! :)