Kit includes: (kit will come diagram/specs included with the packing slip)
1pcs – UV Germicidal Quartz Lamp 185nm U-Shape 150mm by 10mm by 150mm w/attached harness & connector
1pcs – 12V DC Single Lamp Inverter
1pcs – Low Voltage wire 100mm length w/ connector
For complete kit specifications: CLICK HERE
12V Dual Lamp Inverter, connects two germicidal lamps.
The inverter is designed to supply the Cold Cathode Lamp with correct voltage. First, it will supply a starting voltage up to 900-950 vrms. Then the voltage will drop supplying the lamp a constant current of 4-9 mA at 40-50 KHz.
CAUTION!
Germicidal Cold Cathode lamps are manufactured with quartz glass. The lamp is filled with gas and a very small amount of Mercury – less than 5mg per lamp. These lamps generate UV radiation at 185nm and 254nm. The voltage supplied to activate the lamp is over 600V and is direct proportional with the lamp length.
SAFETY CONCERNS:
· Although the amount of UV and Ozone generation is small, we recommend all suitable precaution to avoid eyes or skin exposure to UV radiation and ozone inhalation. It can produce serious damage to the eye and lung burning.
For this reason, the light produced by a germicidal ozone generation lamp must be carefully shielded against both direct viewing ,reflections, inhaling and dispersed light that might be viewed
· Do not touch the glass/quartz with the bare hands.
· Use appropriate protection, wires and insulated materials to avoid surge voltage from the lamp leads.
· Discard the lamps in accordance with safety code requirements for materials containing Mercury.
· Take also all suitable requirements recommended by the government safety code to avoid a prolong inhalation of Ozone generated by lamp.
· The operation risk is in Group 1 per ANSI / ESNA PR27.3-96.
· This lamp should not be used for cosmetic treatments, therapeutic or diagnostic purpose.