You are bidding on 1 MVME2433 VME processor card, configured for use in GE Lightspeed series CT machines.

These are the main component of the Hawk3 RIP board assembly, GE p/n 2339284.

This auction is for the VME CPU board only, it does NOT include the DIP PMC card (2245261) or the SCSI PMC, although we do have a potential source of SCSI PMC's if you need them.

A technician installing this board will need to do a PFLASH from the workstation when installing this board in the system for the first time.

Your machine will also need the correct software load for this version of RIP board.

We have a large number of these units available.

Contact us for details or with any questions at 978-835-4539.

Shipping in the USA is $10, international shipping will be calculated after sale.

Payment terms are available to qualified buyers, and we accept corporate and government PO. CAGE code 4DXW9

International bidders may pay by wire only. All others contact us to arrange payment terms.

We also provide repairs, spares support, engineering, and consulting services for a wide range of embedded and industrial computer hardware.

Creative solutions for maintenance of obsolete hardware are our specialty.

Find out more about Embedded Engineering and what we can do for you at www.embeddedsales.com

 

Copyright Motorola Inc. 1988 - 1999, All Rights Reserved
 
PPC4 Debugger/Diagnostics Release Version 1.2 - 02/15/99 RM01
COLD Start
 
Local Memory Found =08000000 (&134217728)
 
MPU Clock Speed =350Mhz
 
BUS Clock Speed =100Mhz
 
Reset Vector Location  : ROM Bank B
Mezzanine Configuration: Single-MPU
Current 60X-Bus Master : MPU0
Idle MPU(s)            : NONE
 
System Memory: 128MB, ECC Enabled (ECC-Memory Detected)
L2Cache:       1024KB, 140Mhz
 
PPC4-Bug>sd


PPC4-Diag>cnfg
Board (PWA) Serial Number = "<REDACTED>     "
Board Identifier          = "MVME2433-1      "
Artwork (PWA) Identifier  = "01-W3839F05A    "
MPU Clock Speed           = "350"
BUS Clock Speed           = "100"
Ethernet Address          = <REDACTED>
Primary SCSI Identifier   = "07"
System Serial Number      = "                "
System Identifier         = "                               "
License Identifier        = "<REDACTED>  "
PPC4-Diag>

PPC4-Diag>st
HAWK     SMCR: SMC Register Read..................... Running ---> PASSED
HAWK     PPCR: PPC Register Read..................... Running ---> PASSED
HAWK     PPCW: PPC Register Walking Bit.............. Running ---> PASSED
HAWK     PCIR: PCI Register Read..................... Running ---> PASSED
HAWK     TMR: Timers................................. Running ---> PASSED
RAM      QUIK: Quick Write/Read...................... Running ---> PASSED
RAM      ALTS: Alternating Ones/Zeroes............... Running ---> PASSED
RAM      PATS: Patterns.............................. Running ---> PASSED
RAM      ADR: Addressability......................... Running ---> PASSED
RAM      CODE: Code Execution/Copy................... Running ---> PASSED
RAM      PERM: Permutations.......................... Running ---> PASSED
RAM      RNDM: Random Data........................... Running ---> PASSED
RAM      BTOG: Bit Toggle............................ Running ---> PASSED
RAM      REF: Memory Refresh Test.................... Running ---> PASSED
RTC      RAM: MK48T0x Battery Backed Up RAM.......... Running ---> PASSED
RTC      ADR: MK48T0x RAM Addressing................. Running ---> PASSED
RTC      ALARM: MK48T59 Alarm Interrupt.............. Running ---> PASSED
UART     REGA: Register Access....................... Running ---> PASSED
UART     IRQ: Interrupt.............................. Running ---> PASSED
UART     BAUD: Baud Rate............................. Running ---> PASSED
UART     LPBK: Internal Loopback..................... Running ---> PASSED
Z8536    CNT: Counter................................ Running ---> BYPASS
Z8536    LNK: Linked Counter......................... Running ---> BYPASS
Z8536    IRQ: Interrupt.............................. Running ---> BYPASS
Z8536    REG: Register............................... Running ---> BYPASS
SCC      ACCESS: Device/Register Access.............. Running ---> BYPASS
SCC      IRQ: Interrupt Request...................... Running ---> BYPASS
PAR8730X REG: PC8730x Parallel Port's Register/Data.. Running ---> BYPASS
KBD8730X KCCONF: Keyboard Controller................. Running ---> BYPASS
KBD8730X KBCONF: Keyboard interface.................. Running ---> BYPASS
KBD8730X MSCONF: Mouse interface..................... Running ---> BYPASS
ISABRDGE REG: i82378 Register Access................. Running ---> PASSED
ISABRDGE IRQ: Interrupt Request...................... Running ---> PASSED
VME3     REGR: Register Read......................... Running ---> PASSED
VME3     REGW: Register Walking Bit.................. Running ---> PASSED
DEC      REGA: 7000 PCI Register Access.............. Running ---> PASSED
DEC      XREGA: 7000 Extended PCI Register Access.... Running ---> PASSED
DEC      ILR: 7000 Interrupt Line Register Access.... Running ---> PASSED
DEC      ERREN: 7000 ERREN and SERREN Bit Toggle..... Running ---> PASSED
DEC      IOR: 7000 I/O Resource Register Access...... Running ---> PASSED
DEC      SPACK: 7000 Single Packet Xmit/Recv......... Running ---> PASSED
DEC      CINIT: 7000 Chip Initialization............. Running ---> PASSED
CL1283   REG: cl1283 Register Access................. Running ---> BYPASS
PPC4-Diag>
 
 


inkFrog logoinkFrog logo
inkfrog terapeak

i000000