Please read carefully. Pictures are representative only, and mostly of more complex pieces that this default listing is for.

Big description of customization possibilities below. For the purposes of this listing, if you just want to buy one and not think about it past this, I've entered a default setup. DO NOT BUY THIS if you're wanting any type of customization. Send me a message and we'll get it figured out and done correctly so you get what you want.

This listing, as is, has several size options. All options in this listing are red oak (you can request white oak or ash at this same price) at whatever size you'd like. They would be best represented by the picture labeled "4". Cut out, sanded down, and mounted on the bearing ready for you to finish as you'd like.

The sizes listed will follow the same issue as noted below. Wood is temperamental and I can't guarantee that a 12 inch will be exactly 12 inches. It'll be close, within 1/4 inch usually. I'll do my best to make it as close to the size as I can.

I'm happy to make these defaults if you want, I'm thrilled to make any other customized option if you'd rather go that way. Prices below are negotiable. If you want multiples the price could go down, want something simple the price could go down, want something more complex it could go up. We'll see what we can see.

These default pieces will still be built to order. I entered that it would take 15 business days, but it could go out sooner. Feel free to message me and see if I can get it done sooner.

Now to the options:
I make lazy susans and will custom make whatever you might want. Pictures are of ones I've done, a few I have still but for the most part anything I do will be custom made to what you want.

The pictures: all are finished pieces (except 4, 5, 6) and the price listed would be the charge to make one like it.
Also lists the type of woods, but not entirely sure since I was using left over stuff in my shop that wasn't labeled to do these.

The picture (labeled #2) is a 14 inch striped (cherry/red oak/white oak) beaded edge. $59
Picture labeled #1 is a 12 inch walnut with a basic round over edge. Ignore the inner light circle, this was the first piece I made and was playing with different things. $41
Picture labeled #3 is a 22 inch pine, stained, with a round over on both the top and bottom. $81
Picture labeled #10 is a 13 1/2 inch striped (red oak/ash/birch I think), with a round over on both the top and bottom. $67
Picture labeled #11 is a 12 inch Ash (I think) with a round over on both the top and bottom. $45
Picture labeled #12 is a 12 inch striped (red oak/ash/birch I think) with a round over on both the top and bottom. $55

Picture 4-7 are all the same piece. Red Oak 14 1/2 inch that I took pictures of throughout the process.
#4 is the base type. The circle is cut out, sanded down and mounted on the base only. You can paint it, finish it however you might want. $31
#5 is the same piece but with just a basic round over on the top. Still unfinished. $37
#6 is the same piece but I deepened the round over on the top to a beaded edge. The bead and a top and bottom round over would be the same price. $41
#7 is the same piece finished. I rub it with a varnish oil to highlight the grain patterns then put 3 coats of a gloss lacquer on top. $53
Picture #8 is the same piece as #3 taken from the side to show the low profile. That 22 inch held me kneeling on it and twirling in circles just to see if it could.

Picture #9 is the finished base. It's a 9 inch or 12 inch (12 for larger than 19 inch tops) lazy susan bearing swivel with felt glued to the bottom so it won't scratch whatever you've put it down on.

Prices are rather simple based on what type of wood and size you'd like. Prices mentioned below are for the base configuration (picture #4, cut out, sanded smooth, and mounted on the appropriate bearing).
#1 = Red Oak, White Oak, or Ash
#2 = Birch, Maple, or Cherry
#3 = Walnut or Quartersawn Red/White Oak
#4 = Purple/Red/Yellow Heart exotic
#P = Pine
Size - #P - #1 -   #2 -   #3 -   #4
12" - $19 - $24 - $29 - $35 - $42
14" - $27 - $32 - $38 - $46 - $53
16" - $34 - $40 - $47 - $57 - $66
18" - $41 - $49 - $57 - $69 - $80
20" - $52 - $62 - $71 - $85 - $98
22" - $60 - $72 - $83 - $99 - $113

If you wanted a 13" it would be a 14" price.
A basic round over on the top of the piece is $6 more.
A round over on the top and bottom of the piece, or beaded edge is $10 more.
To finish with varnish/lacquer application is $12 more (or a stain and polyurethane on pine).
To stripe the piece (such as several pictures above) is $10 more. Mixing the wood categories is possible (such as cherry and red oak) and the price falls somewhere between the 2 wood types.

Generally it'll take 2-3 weeks before it's ready (listed as 15 business days). I really only have time to do these on the weekends, and very limited time during the week. I would get them finished as quickly as I can, the least possible would be 4-5 days.


The bearing swivels I'll use are rated to handle 700 (9" bearing) to 1000 (12" bearing) pounds.

Wood is a temperamental playmate, sometimes you just have to do what it wants, so I can't guarantee an exact size, but will do my best to make it as close as possible. It's also a natural product with different grains, and all will take stain or varnish differently. Every piece is one of a kind.

Pictures 10, and 12, are very striped. To make one as striped as them would be more than normal striped cost, although the price I mentioned next to the picture explanation above is just a normal striped cost. I manufactured my own lumber out of scrap pieces left over from different projects and these are the lazy susan results of some of those pieces.

The picture marked #1 is the first one I made. Lots of playing around there and some visible mistakes. Judge me on the rest of them, know that isn't a good piece. :)