Description:
- Color : Blue /white/ black/red/green
Viscosity: 25 ℃ 200 ± 50PS with good thixotropic particle size: <15n
Curing conditions: 80W/cm × 3 high-pressure mercury lamp, irradiation distance 10cm 4-6m/min
Adhesion: 100/100
Hardness:> 5H
Soldering resistance: 260 ℃ ± 5 ℃ 10 S × 3 times
Solvent resistance: trichloroethane boil for 2 minutes with no loss
Insulation resistance: 1 × 1013 above at normal, 40 ℃ RH95% after 72 hours 1 × 1012
Dielectric strength:> 500V/mil
Storage: temperature 22 ± 2 ℃, humidity of 55 ± 5% RH
- Notice: Don't dilute when using the ink . You need to fully stir well before using it.
- This paint is used to protect PCB traces from corrosion, moisture. It is also used for repairing PCB after soldering, rework.
Usage :
Apply paint on your PCB
Spread it on the PCB with covering the transparent mask film
Expose it under UV light ( or sun ) for a few minutes
Wash away the extra paint by gasoline or oil base solvent
Apply paint on your PCB
Spread it on the PCB with covering the transparent mask film
Expose it under UV light ( or sun ) for a few minutes
Wash away the extra paint by gasoline or oil base solvent
Contact:
If there is any question, please feel free to contact us, we will reply to you as soon as possible.
supreme
