OCELL is a 0.5 inch OLED module designed as an Arduino shield and also available for other micro-controllers. It is one of the smallest Arduino display modules available.

You could connect it to Ardunio Micro directly without doing any PCB layout. It also works with other micro-controller boards. It is a good choice for a DIYer to make a project which requires a tiny OLED display.

Features:

• It is one of the smallest Arduino display modules available
• Very high contrast and brightness
• Very low power consumption
• No backlight required
• Supported by U8glib library

Highlight :

These OLED displays are small, only about 0.5" diameter, but very readable due to the high contrast (450cd/m^2 brightness). This display is made of 60x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast and very low power consumption.

Specification:

• PCB dimensions: 17.8 x 15.5 mm
• Screen size: 0.5 (inch) W x H: 15.3 x 10.2 mm
• Colour: Monochrome (white)
• OLED  type: PM -OLED
• OLED driver: LD7032
• Pixels : 60 x 32
• Contrast: 2000: 1
• Communication: SPI, I2C

Parts:

• 1x module PCB
• 1x OLED display
• 1x10 pins header

Notice: Does not include: Arduino