PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.
How to Use:
Special note - Please remove both sides of the teal colored protective film before using.
Cut the PEI sheet to size by scoring with a hobby knife. Remove the blue protective film from the PEI sheet. Carefully apply the 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.
Once the PEI sheet is attached, re-level your print bed and you are ready to go!
It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 2400 grit paper will also give the PEI sheet more life.
Size Options
- 8 inchex by 8 inches
- 10 inches by 10 inches
- 12 inches by 12 inches
PEI sheet thickness: 0.8mm
If you select the 5 pack option, that includes 5 PEI sheets and 5 3M 468MP adhesive transfer tapes.