IBM PCIe3 RAID SAS quad-port 6 Gb Adapter FC EL3B 57B4 00MH910 - NEW

 

Up for your consideration are brand new IBM PCIe3 RAID SAS quad-port 6 Gb Adapter (FC EL3B; CCIN 57B4)

Overview

The PCIe3 RAID SAS quad-port 6 Gb LP Adapter is a PCI Express (PCIe), generation 3, RAID SAS adapter that has a low-profile and short-form factor. The adapter is used in high-performance and high-density, serial attached SCSI (SAS) applications. It supports the attachment of SAS disk and SAS tape by using four mini SAS high-density (HD) x4 connectors that allow the physical links to be used in various narrow and wide-port configurations. SAS tape attachment is only supported in a single adapter configuration and cannot be mixed with SAS disk on the same adapter. The adapter does not have write cache.

The adapter is a 64 bit, 3.3 V, bootable SAS adapter that provides RAID 0, 5, 6, 10, 5T2, 6T2, and 10T2 capability, and system level mirroring via the operating system. The adapter provides both single and dual RAID controller configurations. Dual controller configurations (dual storage IOA) must run RAID. JBOD (512 byte) functionality is supported only in a single controller configuration based on the operating system. Best performance is achieved when multiple RAID sets are configured and optimized under a pair of adapters in a high availability, multi-initiator RAID configuration (dual storage IOA) which allows for an Active-Active mode of operation.

The adapter support a maximum of 98 attached disk devices that depends on the drive enclosure attached. A maximum of 48 devices can be solid-state devices (SSDs). Externally attached devices are designed to run at a maximum data rate of 6 Gbps for SAS disk devices and 3 Gbps for SAS tape devices. This adapter supports RAID and non-RAID DASD, and SAS tape devices. Specific device attachment support rules apply. This adapter supports the multi-initiator and high availability (dual storage IOA) configurations in AIX®, IBM® i, and Linux partitions. This adapter enables configuring the SAS drives as dedicated hot-spares with equal or higher capacity.

IBM Part Number:      00MH910

IBM Feature Code:     FC EL3B

I/O bus architecture:   PCIe 3.0 but compatible to PCIe 2.0 or PCIe 1.0 slots

Form factor:                Low profile

 

I have a total quantity of 2 brand new cards available.

 

Bulk purchase available

 

Low shipping rates to the USA (lower 48 states) and Canada

 

 

 

PAYMENT INSTRUCTIONS

Payment must be made using Paypal.

 

 

SHIPPING INFORMATION

Needless to say that shipping will be done with the utmost care.

Item will be sent on the next business day after payment is received.

 

ADDED VALUE:

- Low shipping rates for Canada and the USA (lower 48 States).

- Shipping service used is Expedited Parcel (approx 4 business days) and not Regular Parcel (up to 7 days).

- Insurance is always included.

 

 

RETURN POLICY

Returns are accepted up to 7 days after you receive your item. All returns must first receive an approval via email. You will be refunded the purchase price minus eBay fees and shipping fees. Return shipping is not refunded.

 

 

Thanks for looking!

 

Additional pictures are available on demand.