Yamaha's design team has worked hard to make REV500 sound great but remain affordable.
A large custom LCD display and dedicated rotary controls for the four most critical reverb parameters make REV500 extremely easy to use.
REV500 features 20-bit AD/DA oversampling converters and the same DSP as that of the PROR3 for superb sonic performance.
Unlike some pseudo stereo reverberators, REV500 is a true stereo reverb processor, with independent left and right channels.
Reverb programs are categorized into group for selection ease. The 100 preset programs and 100 user programs are divided into four categories: Hall, Room, Plate and Special.
REV500 has snare and rim shot samples built-in, so programs and edits can be auditioned directly from the front panel (AUDITION button).
Balanced XLR and phone jack connections allow simple hookup to professional or semiprofessional gear. Input and output levels for each channel are independently switchable between -10dB and +4dB.
A dual level control and two four-segment LED level meters simplify level setting for optimal performance.
REV500 supports real-time parameter control via MIDI Control Changes and program selection via MIDI Program Changes. MIDI Bulk Dump is used for user program backup.
An optional footswitch can be used to mute the reverb effect or select reverb programs. Selection order is determined by the MIDI Program Change Map.
Audio | Frequency Response: 20Hz - 20kHz (+1, -2dB); Dynamic Range: 96dB typical, greater than 90dB; Noise Level: Less than -72dB (IHF-A Filter); THD: Less than 0.03% (1kHz @max. level, CD 20kHz LPF filter) | |
---|---|---|
AD/DA Conversion | AD: 20-bit, 64-times oversampling; DA: 20-bit 8-times oversampling; Sampling Rate: 44.1 kHz | |
MIDI Control | Program Change, Control Change, Parameter Change, Bulk Dump | |
Memories | Preset: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25; User: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25 | |
Inputs | Connector: XLR-3-31 type x 2, phone jack x 2; Nominal Level: +4/-10dB switchable; Impedance: 20 kOhms | |
Outputs | Connector: XLR-3-32 type x 2, phone jack x 2; Nominal Level: +4/-10 dB switchable; Impedance: 150 Ohms | |
Front Panel | Controls: INPUT LEVEL, PRE DELAY, REV TIME, HI-RATIO, ER LEVEL; Buttons: TYPE, PRESET/USER, -, +, STORE, AUDITION, EFF LEVEL, UTILITY; LCD: Custom LCD; LED: Two four-segment level meters, UTILITY, EFF LEVEL; Switches: POWER | |
Rear Panel | Connectors: INPUT L/R (XLR x 2, phone jack x 2), OUTPUT L/R (XLR x 2, phonejack x 2), FOOT SWITCH (phone jack), MIDI IN, MIDI OUT,(5-pin DIN x 2); Switches: INPUT LEVEL (+4/-10 Db), OUTPUT LEVEL (+4/-10 Db) | |
Power Requirements | 120 V, 60 Hz, 15 W | |
Dimensions (W x D x H) | 480 x 227.9 x 45 mm (18.9" x 9" x 1.8") | |
Weight | 3.5 kg (7.7 lb.) |
Shipping
Shipping anywhere in the continental United States via the UPS Ground (Insured) Delivery is $15.00! There is a $30 surcharge for Alaska, Hawaii, and Puerto Rico. International buyers should contact us for shipping options and information prior to bidding.