Features
- Up to 20 Days of GPS recording in
motion sensor mode.
- As small as a pocket
sized device, can be hidden in a car.
- Record travel routes and check on
the Google
Earth for free.
- Display direction & distance
of destinations in one screen for navigation.
Product Details
< Hardware >
- GPS Chip: MediaTek MT3339, 66 channel ((22 Tracking, 66
Acquisition).
Built
in Active GPS Antenna (15mm x 15mm). NMEA 0183 Ver 3.01.
Sensitivity:
Acquisition (-148dBm), Tracking (-165dBm)
- Cold/Hot start time: 32sec/1~2sec in open sky.
- Pocket
sized device:
2.5in(W) x 1.6in(H) x 0.58in(T) (63.5mm X
40mm x 14.5mm)
- Display Type: Monochrome OLED,
High brightness Self-emission.
- Display resolution: 64 x 32 dot matrix.
- Display View Area Size: 12mm(W) x 6mm(H)
- Built in Sensitive Vibration/Motion Detection Sensor
for power saving.
- Memory Size: Built in 2.0 MByte Flash memory.
- 2 Function Buttons: Menu & Power.
- 1 USB Port (micro B)
- Powered
by 2 AAA batteries
AND/OR USB power(5V) from PC.
Because of use of
replacement battery, GTD10 can be used for lifetime.
- Battery life: About from 2.5 days to
20 days in motion sensor
mode depends on battery capacity.
- 40 of Destinations/Favorites/Locations. (can be modified/updated by
file on PC or Serial communication
via USB and Menu button).
- One interface
signal
(open-collector) output on USB port
of GTD10 can be connected
to external devices such as Relay, Buzzer, LED Light Etc. Rated at 100mA
at 50V. Synchronized with 40 destinations.
< Software >
- Instant
Track record by hand.
- 8000 of Track logs.
- Displays Number of Satellites, Distances &
Directions (one or two arrows) for navigation in one screen.
- Displays a local Time &
Date based on GPS’s time/date.
- Displays a Battery capacity
and Disk size.
- Displays a distance up to 0.001 ~ 9999.999 miles.
- Displays a Longitude, Latitude and Latitude.
- Indicates a current location is IN or OUT boundary zone of
the destination.
- Support the unit change for Mile, Kilo & Yard.
- Integrates
directly into Google™ Earth (free application) and Microsoft™
Live and fully compatible with many other off-the-shelf mapping
programs in file or via USB serial port.
The
user guide for Google™ Earth is
provided.
- USB mass storage device is supported for
connecting PC and compatible with Windows XP or newer and Mac OS X 10.4 or
later.
- USB
serial communication Mode support modifying 40 locations’ name/longitude/latitude and upgrade the latest
firmware.
- USB
serial GPS Mode
support sending the current raw NMEA data to PC in real time.
- USB
serial File mode support
sending GoogleEarth the recorded GPS NMEA data that is the instant data OR
all data selected by Menu on GTD10.
Sending
interval: 0.5sec ~ 5 Sec.
- The GTD10 generally stays in the Hibernate system
power state but wakes up periodically to record(save) position.
7 interval (periodic) times for recording are supported:
30second(Min
rate),1m,2m,3m,4m,5m & 10minutes(Max rate).
1 second interval is
not supported.
If there is no
movement in motion sensor, it stays in hibernate system power state. The motion
sensor can be disabled by Menu.
- Firmware
upgrade mode
supported and the latest SW can be downloaded from GTD10 website.
Maintenance
Service:
- Free Tech support.
- Free unlimited Software upgrade. Provide SW Tools
for upgrade.
Package including:
- 1 x GTD10
- 1 x micro B USB cable
- 1 x User manual
- 2 x AAA batteries.