Technetix ESI-03N Double Sided 3 Way Splitter

Overview

Products within the Ecoline range excel both in electrical 

and mechanical performance. 

Though designed for use 

within indoor environments, they are also specified for use 

within street-side plant. 

The products are easy to install 

with a compact housing and some models are stackable. 

All F-connector contacts meet the SCTE standards (ANSI 

SCTE 02 2006). 

The material of the inner spring has been 

designed for connecting coax cables with an inner core 

of 0.56 to 1.30 mm. 

It retains this elasticity and provides 

effective clamping force even when varying thicknesses of 

inner conductor are connected in succession. 

The intermodulation performance, which is an important 

factor in high level return path signals, has been greatly 

improved through a newly developed ferrite and specially 

designed circuits. 

The high frequency shielding exceeds 

Class A requirements (EN-50083-2:2006) over the whole 

frequency range from 5 MHz to 1000 MHz.

Ingress Safe

Our patented Ingress Safe technology uses a phase 

cancellation technique to considerably reduce ingress 

created within the home. 

It has no adverse effect on the 

CATV spectrum and is transparent to the forward and 

reverse path signals.

• Significantly reduces noise on CATV networks, 

improving network performance

• Field tests show Ingress Safe units in the distribution 

network can deliver improvement in the carrier to noise 

ratio that averages from between 3 dB and 12 dB, 

depending on the network topology

• Prevents or delays the need to deploy technicians to 

rectify faults caused by the cumulative effects of ingress 

on network performance and customer service

• High quality 3-way balanced and unbalanced

installation splitters

• Modem Safe™ surge protection and

intermodulation reduction solution

• IngressSafe™ - unique passive ingress reduction

technology

• High return loss

• CPD Safe™ - NiSn plated housing

• Easy to install - compact and stackable in-line

model

• 7 mm stand-off space to fit cable underneath

• Exceeds EN Class A screening requirements

Modem Safe

Modem Safe is a highly effective surge protection solution 

for sensitive network and in-home CPE. Based on passive 

circuits, the technology does not rely on discharge tubes, 

extending the lifespan of the solution. 

• Blocks high and low voltage pulses and unwanted DC 

voltages 

• Prevents internal ferrites within the product from 

becoming magnetised (avoiding deterioration in the 

performance of CPE)

• Drives fewer reported faults 

• Improves customer service 

• Reduces truck rolls

CPD Safe

CPD (Common Path Distortion) is well known for producing 

signal interference on networks. It is caused by electrolytic 

corrosion or the oxidisation of dissimilar metals when in 

close contact. CPD Safe technology protects against 

CPD.

• Removes a primary cause of CPD

• Reduces signal interference on the network

• Drives fewer reported faults

• Reduces truck rolls