Important Notes
These Adapters ARE NOT HUBCENTRIC. We recommend purchasing hubcentric rings to reduce steering wheel vibrations.
As shown in the pictures... These spacers DO NOT HAVE A WHEEL CENTERING LIP. Your wheels will not center properly, and you will get steering wheel vibration, if your wheel lug nuts are not cone/conical seat.
Your vehicle may have different thread pitch wheel studs than what's supplied with these wheel spacers. This means you would need to purchase different lug nuts for proper installation. Message us for more information prior to
purchasing the items.
DO NOT ADD "NOTES TO THE SELLER" DURING CHECKOUT. If you have questions/requests/comments/information, send us an eBay message or give us a call
Important Safety Advisory
As with any component you purchase for your vehicle, installation should be done by a qualified technician. We've provided the following information as a general
reference for purchasing and installing these spacers/adapters. The following list isn't all-inclusive and may be different depending on the vehicle you drive,
type of wheels you have, and ideal setup you're trying to achieve. Failure to install properly may cause your lug nuts/wheel studs/spacers to loosen or break while
driving. If you are not confident or familiar with the installation, please ask a trained professional for help.
Before Purchasing
- Required that proper measurements are taken to ensure that by adding this spacer, the wheel/tire won't hit the fender or any other part of the vehicle.
- The vehicle’s wheel studs need to be measured. If the OEM studs are longer than 1.0" (25mm), it will extend past the spacer's surface. It may not be
possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad.
Before Installation
Check compatibility of spacer-to-hub, spacer-to-wheel, and lug nuts (thread pitch & seat type)
During Installation
- Installation should be performed by a trained professional using proper tools.
- Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components.
- Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nut tightens, however, it varies depending on thread pitch and type of vehicle.
- ALL Lug nuts MUST be torqued to manufacture specifications.
After Installation
- Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing).
- Inspect and re-torque ALL lug nuts after 25-50 miles of driving
Note: No returns or exchanges once product has been installed on the vehicle.
Compatibility
Vehicle Bolt Pattern |
Wheel Bolt Pattern |
4x114.3 or 4x4.5" |
4x100 |
1995-2000 - Acura - CL (2.2 & 3.0 Models Only)
1986-1990 - Acura - Legend
1995-2000 - Acura - TL (2.5 Only)
1979-1992 - Dodge - Colt
1987-1993 - Ford - Festiva
1990-2002 - Honda - Accord (4-Cylinder Only)
1992-1996 - Honda - Prelude
1995-2000 - Hyundai - Accent
1992-2000 - Hyundai - Elantra
1989-2000 - Hyundai - Sonata
1997-1999 - Hyundai - Tiburon
2001-2004 - Kia - Optima
1984-1988 - Mazda - RX7
1985-1996 - Mitsubishi - Galant
1976-1985 - Toyota - Celica
1985-1988 - Toyota - Cressida
1979-1985 - Toyota - Supra
*** Don't see your vehicle above? Message us with the year/make/model of your vehicle and we'll be glad to find a compatible spacer ****
Return Policy
Please see "Shipping and Payments" tab.
Or for more detail, view our Full Return Policy