Hi Folks - here we have the GE NSR040A0X43Z Raptor 200watt, 40amp board for box mods. These rock a lot of power, and they use three 3.7v lithium cells. I can fit a build into a 1590B box - but it's tight. This board is similar to the Raptor 120w - but this board is deeper, and a little higher. The last three pictures are of my build - wires installed on the board. I will include a diagram with each board.
What you'll need for this board: Up to 13.8v in, 200 ohm pot with 270 ohm resistor inline, 2 x 22uf 16v MLCC capacitors, Fireswitch with a 1K ohm resistor inline, and your regular extra's. I would suggest Fuses with this - the RGEF1000 will work - with 4 wired in parallel off the (+) on the battery.
Here is a link to the datasheet: NSR040 Datasheet
Here are a couple of wiring diagrams to look at: HERE
Thanks for looking, I am just another vaporer / modder here in CT looking to get some quality parts out to modders at reasonable prices. Vape on my friends.
You may be interested in our other eBay listings.
Contacting Us:
By far the best way to contact me about an order, or if you have specific instructions such as addresses and such, please leave a "note to seller" in the sales order. When I am shipping orders I will see that note before anything else. If you email me, or contact me through the ebay mailing system, I may not get your message before your order is processed. Unfortunatly I am unable to keep up with email at times - thanks for your understanding. This occurs mostly before our 4pm Eastern Time shipping deadline - I try to get everything out, and as a result email's get missed.
About Us:
I quit smoking and went with vaping in 2012 - 2013, and at the time I was pretty discouraged with the parts / accessories available to modders in general. Several items that I purchased just didn't work. I knew there had to be a better way. I started doing extensive research on what the best quality parts were, and where to obtain them. I started this business with some IRLB3034 mosfets and some Keystone 1048 dual battery trays. They sold out in one day. We've come a long way since then, but I still like to tinker and still sell mods, and I am usually always working on something new. I like to think that I am a vaporer / modder first, and a business person second.
I believe in treating my customers with the truth, intergrity, honesty and respect. If you have issues or problems with the products that I sell, I will always back them up. I will ususally offer replacements without a fuss, and moreover I will try to always make it right. In some cases I will need the defective product back, as I can get credit for it from my suppliers. I don't believe in and I don't like policies, procudures etc. I do believe in providing a quality product at the right price makes for satisfied customers. If there is a problem, let me know, we can work it out.
On that note, a kind word about the Post Office. I said I don't like policies, but I use USPS exclusivly for shipping. They, in my experience, have a 1 in 400 failure rate - meaning that 1 in every 400 packages will just "vanish." Will I cover that? Yes. Also, they seem to "misplace" 1 in 200 packages that seem to surface after a few days go by. More often than not, I will get a note from a customer that their package hasn't arrived and "what am I going to do about it?" Ok - not withstanding the aforementioned - the first thing to do is always check with your local postoffice, especially if tracking shows that it was in their custody and control. If it shows delivered, and you didn't get it, again - please contact your local post office. I, in any case, cannot contact your local post office and find the package. It almost always turns up satisfactorily. In the case that it does not, I will replace the shipment but ONLY after at least 5 - 7 business days have passed and it doesn't show up. And please remember, I am not the post office - yet sometimes I get treated as such. I can promise you that I got your package to my postoffice on time and in one piece. In any event of headaches, we will work it out. Thanks. The positive part of this is that most in CONUS will have their packages in 2 (most) - 3 days. Thanks
