Notizen vor der Bestellung: |
In den meisten Fällen, wenn wählen Sie economy shipping, Verschiffenzeit ist ungefähr 20 bis 35 Tage. |
Treten Sie mit uns bitte in Verbindung, bevor Sie Debatte öffnen, versprechen wir, jedes Problem sorgfältig zu lösen. |
Wir sind NICHT für irgendeine Zollgebühr oder Importabgabe verantwortlich. |
|
Introduction:   
YHS-715 Volt/mA Calibrator is a signal source and measurement tool. This Calibrator can be used in measurement or output 0 to 24 mA DC current loop, and 0 to 10 V DC voltage.   
|
Features:
Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution. |
Measure voltage output process signals from PLCs, transmitters. |
Source or simulate 24 mA loop current. |
Source voltage to 100 mV or 10V. |
24V loop supply with simultaneous current measurement. |
Enhanced voltage and current measure and source accuracy. |
Improved battery life. |
250 ohm HART resistor with loop power. |
Holster features test lead storage. |
Compatible with toolpack magnetic hanging system. |
Step and linear ramp output function. |
Configurable zero and span settings. |
|
Model | Fluke715 | | Function Specifications | | Measure /Source mV | Range: | 0 to 200 mV | | Resolution: | 0.01 mV | | Accuracy: | 0.015% + 2 Counts | | Measure /Source V | Range: | 0 to 20 V | | Resolution: | 0.001 V | | Accuracy: | 0.01% + 2 Counts | | Measure /Source / Simulate mA (% of span) | Range: | 0 to 24 mA (-25% to 125%) |
| Resolution: | 0.001 mA | | Accuracy: | 0.01% + 2 Counts | | Loop Power | Range: | 24 V DC | | Accuracy: | ± 10% | | Drive | | 1000 Ω (24 mA) | | Display | | Clear 5 Digit LCD |
|