BUY WITH CONFIDENCE! HASSLE FREE!

ShipSaver will automatically insure your items

Covered by full Supermicro manufacturer warranty!!!

Integrated Board Super X10DRW-i Key Features 1. Dual socket R3 (LGA 2011) supports     Intel® Xeon® processor E5-2600 v3     family; QPI up to 9.6GT/s 2. Up to 1TB ECC DDR4 2133MHz;     16x DIMM sockets 3. 2x PCI-E 3.0 x16 (FHHL), 1x PCI-E 3.0     x8 Mezzanine for HBA cards 4. 10x Hot-swap 2.5" SAS/SATA HDD     bays 5. Intel® i350 Dual port GbE LAN 6. I/O ports: 2x SuperDOM, 1x VGA,     1x COM, 6x USB 3.0 (4 rear, 2 front) 7. Optional 2x 2.5" NVMe drives support 8. 700W Redundant Power Supplies     Platinum Level High-efficiency Available Colors: Black      Drivers & Utilities   BIOS   IPMI   Tested MEM   Manuals   Quick-References

Product SKUs SYS-1028R-WC1R SuperServer 1028R-WC1R (Black)   Motherboard Super X10DRW-i   Processor/Cache CPU Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **) Dual Socket R3 (LGA 2011) Cores / Cache Up to 18 Cores / Up to 45MB Cache System Bus QPI up to 9.6 GT/s Note ** Please contact your Supermicro sales representative for additional details.   System Memory Memory Capacity 16x 288-pin DDR4 DIMM sockets Up to 1TB ECC LRDIMM, 512GB ECC RDIMM Memory Type 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices Chipset Intel® C610 Chipset SATA SATA3 via Intel® C610; RAID 0, 1 SAS SAS3 (12Gbps) via LSI 3108 RAID 0, 1, 5, 6, 10, 50, 60 support 2GB DDR3 Cache IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Controllers Intel® i350 Dual Port Gigabit Ethernet Controller Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8211E PHY (dedicated IPMI) Graphics ASPEED AST2400 BMC   Input / Output Serial ATA 2x SATA3 (6Gbps) ports SAS 8x SAS3 (12Gbps) ports LAN 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port USB 6x USB 3.0 ports (4 rear + 2 via header) VGA 1x VGA port Serial Port / Header 1x Fast UART 16550 header DOM 2x SuperDOM (Disk on Module) ports   PC Health Monitoring Voltage Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator FAN 6x 4-pin fan headers (up to 6 fans) 6x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI LED CPU / System Overheat LED Suspend static indicator LED UID/Remote UID Other Features Chassis intrusion detection Chassis intrusion header SDDC Support RoHS Chassis Form Factor 1U Rackmount Model CSE-116TQ-R706WB   Dimensions Width 17.2" (437mm) Height 1.7" (43mm) Depth 23.5" (597mm) Gross Weight 46 lbs (20.9kg) Available Colors Black   Front Panel Buttons Power On/Off button UID button LEDs Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED   Expansion Slots PCI-Express 2 PCI-E 3.0 x16 full-height, Half-length slots   Drive Bays Hot-swap 10 Hot-swap 2.5" SAS / SATA HDD trays (connected to onboard storage controller)   Backplane SAS/SATA HDD Backplane Optional 2x 2.5" NVMe drives   System Cooling Fans 5x 4cm heavy-duty counter-rotating fans w/ air shroud and optimal fan speed control   Power Supply 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C AC Voltage 700W: 100 - 140 V, 50-60 Hz 750W: 200 - 240V, 50-60 Hz DC Output +5V standby 3 Amp DC Output +12V 700W: 58 Amp @ 100-140V 750W: 62 Amp @ 200-240V Certification   Platinum Certified   (Cert. in progress)   System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 BIOS resuce hot keys USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1   Management Software SuperDoctor® 5 Watch Dog NMI IPMI 2.0 Intel Node Manager Power Configurations ACPI / APM Power Management Power-on mode for AC power recovery   Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature:    10°C to 35°C (50°F to 95°F) Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing)

See Parts List Parts List - (Items Included)   Part Number Qty Description Motherboard / Chassis MBD-X10DRW-i CSE-116TQ-R706WB 1 1 Super X10DRW-i Motherboard 1U Chassis Backplane BPN-SAS3-116A-N2 1 Backplane support 8x 2.5" SAS2/SAS3/SATA3 HDD/SSD on device ID[1-8], with SGPIO. Support 2x 2.5" PCIe NVMe SSD on device ID[9-10] - with PCIe x1,x2,x4 support, max 25W/slot.,RoHS/REACH,PBF Cable 1 CBL-SAST-0568 1 Internal Mini-SAS HD to Mini-SAS HD 35cm,30AWG,12Gb/s,HF,RoHS/REACH,PBF Cable 2 CBL-CDAT-0662 1 8 pin to 8 pin round SGPIO cable, 61.5cm, 28AWG, pinout 1-1,RoHS/REACH Cable 3 CBL-0484L 2 55cm 30AWG SATA S-S cable Cable 4 CBL-SAST-0550 1 Internal Mini-SAS HD to Mini-SAS HD 25cm,30AWG,HF,RoHS/REACH,PBF Riser Card RSC-R1UW-2E16-O-P 1 RSC-R1UW-2E16-O-P Heatsink / Retention SNK-P0047PSC 1 1U Passive Front CPU Heat Sink w/ a Side Air Channel for X9, X10 Systems Equipped with a Narrow ILM MB Heatsink / Retention SNK-P0057PS 1 1U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB Power Supply PWS-706P-1R 2 1U 750W redundant power width 54.5mm(Platinum),HF,RoHS/REACH,PBF

 

Terms and Conditions

Hours of Operation

Our business hours are 10am to 5pm PST Monday through Friday. All email requests will be addressed within 24 hours.

Returns or Exchanges

Returns postmarked within 30 days of the delivery of the original shipment will be accepted with 20% restocking fee, no returns allowed after 30 days. All returns must be approved by SMCI Express’ Customer Relations who will issue a Return Merchandise Authorization (RMA) number. If the item is defective and is under warranty, please contact us and we will assist you in pursuing a warranty claim with the manufacturer.

Payment

We proudly accept PayPal. If another form of payment needs to be used please contact us first. We can work with most payment methods. California residents will be charged 8.25% sales tax.

Shipping Info

We ship items worldwide, including APO / AEO address, via Fedex or US Postal Service. Items will be shipped within 2 business days upon receiving payment although in most cases they are shipped same or next day. Feel free to email us to confirm product availability and shipping date.