White 52" Ceiling Fan Blades
This is a very specific blade style from a quick install series. I know this works on New Old Jacksonville Brand and some Hampton Bay Collections. (Other manufactures are also around)
Referred to as Quick Connect or Quick Install Blades - Replace blades in a matter of seconds.
Blade are Reversible, Matching Irons also available if you want to replace everything.
This key hole style blade also available in Walnut, Distressed Pine, reversible Espresso/Oil Rubbed Bronze, and as outdoor Plastic White or ORB colors.
Ideal for replacing old, warped or broken fan blades
Provide 52" overall fan sweep (tip to tip when installed)
Easy installation - Just snap them on
Flat Edge
Interior rated - will not last long outside - look for my outdoor ABS plastic blades in my store.
Blades come 5 to a set
To ensure fan is properly balanced and reduce chances of wobbling, all blades should be replaced at the same time.
PRE-DRILLED HOLES
Come with 3 pre-drilled holes for easy installation
NOTE: Not all blades and blade arms with 3 holes will work together.
Please use the measurements provided below to ensure compatibility with your existing blade arms
Length = 21-5/8"
Widest width = 5-9/16"
Example of hole set up.....A and B on top and C represents bottom hole.
A to B = 1-5/8"
A to C or B to C = 2-1/4"
Length of key hole, A, B, or C
Top wide section = 11/16"
Bottom smaller section = 7/16"
Length of hole up/down = 1-1/16"
One easy way to check for compatibility is to remove one of your existing blades and measure the holes on it.
If holes in your current blade are closer together than these blades, these may still be compatible with some minor modifications. Easy instructions on how to drill new holes and still maintain proper balance are included with each order of fan blades.
If holes in your current blade are further apart than the "A to B" measurement above, these blades will NOT work with your existing blade arms. You can either:
Choose a different set of blades from among our rapidly growing fan blade options that has holes at least as far apart as yours.
Compatible blade arms are being added
ALSO - if you want new blade arms - please see my "Medallion" fan blade Irons or blade arms, offered in Brush Steel, Oil Rubbed Bronze, and Appliance White - just check the hole pattern that goes to the motor. Not all are universal but you would be amazed how many are. I offer these blades with the Irons in an additional listing if you check my store, updates the whole fan!
Please let me know if you have any questions
Free Shipping
Best offers will be considered for multiple quantities purchased. These blades weigh a lot so shipping eats a lot of the BIN price.
Thanks for looking