Features:
100% brand new.
Uses: trace grinding, milling and polishing.
Scope: dies, jigs, complex parts and sculpture art.
Notes:
1: During operation, the operator must wear safety glasses.
2: Before using the electric grinder, cylindrical grinding wheel should be trimmed so that the wheel turning and electric grinder shaft concentricity.
3: Electric mill is grinding trace advantage is to adjust the rotation grinding and polishing work. Not too much force.
4: Start electric grinder before, you should check the chuck and the spindle nut firmly, does not allow the power cord is damaged, the power cord can not be touched by the pressure of the workpiece, idling for one minute after the power supply voltage fluctuation when using no more than 10%.
5: When you move electric grinder, pulling the power cord is not allowed, you must move the hand holding the electric mill casing.
Specifications:
Rated voltage: 220V
Rated frequency: 50Hz
Input Power: 400W
No-load speed: no: 6000-32000min-16 stall speed switch
Chuck diameter: 0.6-6mm
Body length: about 27CM / 10.6in
Body diameter: about 5.5CM / 2.2in
Cable length: about 1.8M / 5.9ft
6-speed governor
Note: The cumulative use every tool 5-10 hours Check (replace) the carbon brush or grease.
Package List:
A loom.
A manual.
A key.
Don’t want to wait Click to Buy Directly! | ||
Direct-Buy | ||
Place Bid | ||
Buy Now | ||
Add to cart | ||
Item Specifics | |
---|---|
Brand | Unbranded |
MPN | Does not apply |
Rated voltage | 220V |
Rated frequency | 50Hz |
Input Power | 400W |
No-load speed | no:6000-32000min-16 stall speed switch |
Chuck diameter | 0.6-6mm |
Body length | about 27CM / 10.6in |
Body diameter | about 5.5CM / 2.2in |
Cable length | about 1.8M / 5.9ft |
UPC | 600231250238 |
Search Shop Category | Mini 400W Electric Grinder Engraving Polishing Cutting Machine RotaryTool
Features: Specifications: Package List:
Copyright of Digital2018. All rights reserved. |