I have one of these sets in my Music Room which has performed flawlessly for the past six months.
Mono Block Versions available too!!
The Special Build L10 and PA2205 Passive & Active PreAmplifier shown in Picture 6 is just an example of flexibility in tuning the equipment to the customers' special requirements. The PA2205 is also available through my Ebay advertising pages.
This uses 2 of the L10 Clone cards readily available on Ebay which deliver a powerfully good sound!
It produces a quite surprising level of power cleanly, the signal to noise is good, hum levels= 0 and has been tested driving hard for hours without any heat problems.
Using other production parts from ReelAudios' suite of power supply and driver boards, this unit boasts 2 LED lit VU meters (monitoring each amplifier output), heavy duty toroidal transformers and fusing / protection circuits in 2 matching custom alloy cases 212mm (8 3/8") wide x 257mm ( 10 1/4") deep x 70mm (3") high
PSU Protection:
Mains Input 8 Amp QB 20mm Fuse.
+52VDC Output 8 Amp QB 20mm Fuse.
-52VDC Output 8 Amp QB 20mm Fuse.
+12VDC Output 1 Amp QB 20mm Fuse.
DC Protection (should one of the main DC rails fail - both will turn off. This protects the Amplifier components).
Amplifier Protection:
Speaker Protection Board (Each Channel is monitored for DC breakthrough to the loudspeakers - should this occur then that channel will shut off).
High Quality Alloy Cases connected by a custom heavy duty 1 ft connector cable
High Quality RCA (phono inputs)
Banana 4mm loudspeaker connection terminal post outputs.
3 pin Euro kettle socket (you provide the kettle lead).
Minimalistic 'Old School' looks. Lots of fusing for protection.
Being sold at near cost! - you try and build it cheaper - 16 hours of drilling, assembling and testing!
All Crimp Terminations are soldered too!!
If you are close to West Sussex - come and see/hear a demonstration of the unit. Email for full address.
For Full details of Custom Built 'Old School' Modern Power Amplifiers please go to my web site.
Custom Equipment Design and Build are my speciality.
(Hover over picture to enlarge - click to 'Go there').
| Superb amp, sounds wonderful. Excellent communications, I recommend Paul's work. | Buyer: | During past month |
| 350 Watt Stereo Power Amplifier. Professionally Built. With VU Meters (#331903849351) | £379.00
|
Comments from a customer with 2 sets of my L10 Mono Block Power Amps (these custom versions are available on request):
Holy C*%p! they are very good Paul, I've had them running since they arrived this morning playing a cd on repeat just to warm them up.
I've just sat down to have a good listen and I'm on the second track of 'Tusk' (one of my favourite F.Mac albums) and I can't believe wot I'm hearing.
I've thrown together a system consisting of a Brennan jb7 and a Tisbury Audio passive preamp running through Snell E speakers and I'm impressed.
I want to live with them for a while before I make further comments and give my ears time to get used to them. I'll also try an active preamp and see how they sound then.
Let me know when the Passive/Active preamp we discussed is ready.
regards
Ross
Another Client emailed me after I supplied some spare fuses for his Studio Quad 405 Clone 19" Rack Version:
"Hi Paul,New fuse in and she’s booming!
Lovely crisp, clear sound with the Tannoys.
Thanks for the amp build. It’s a corker!
Best Regards,
Mick"
| Top build quality, comms and fine sound. Recommended. | Buyer: | During past month |
| Quad 405 Clone Stereo Power Amplifier. Professionally Built. With VU Meters (#331669202195) |
| View Item |
| Excellent power amplifier. Well engineered/finished/ and superb sound. | Buyer: | During past month |
| Quad 405 Clone Stereo Power Amplifier. Professionally Built. With VU Meters (#331654158830) |
| View Item |
Hi ..
Received power amp today. Thanks for speedy delivery.
I've had the amp on for a few hours already and am delighted with the sound, build quality, finish. Just a couple of questions:
Do I have a guarantee with the amp (well built/engineered power amps are usually pretty reliable) should anything untoward happen. (Yes 12 Months Normal Use Warranty)
And could you tell me the size/amp etc. of the quick blow fuses - can't read the raised lettering on the fuse holders - my eyes not that good these days. (Shown Above)
Many thanks
Paul.
| Cracking Amplifier. I'm really pleased. Quick delivery too. Many thanks. | Buyer: | During past month |
| |
| Quad 405 Clone Stereo Power Amplifier. Professionally Built. With VU Meters (#331626205775) |
Pay instantly with your debit or credit card through PayPal. |
|
|